+ Reply to Thread
Page 19 of 19 FirstFirst ... 9 17 18 19
Results 181 to 189 of 189

Thread: Reasoning your way through the FSAE design process

  1. #181
    Junior Member
    Join Date
    Jun 2007
    Location
    College Station, TX
    Posts
    2
    Goeff,
    FSAE and this forum will be much poorer for your absence until you work through your problems and can return. I am confident that you will reason your way through your current situation, as you have in the design process and project management.

    You and your team earned my respect in 2006 - first as engineers by the performance of your car, then as honorable people by the way you handled the scoring problems.

    “Reasoning your way through the design process” has been required reading for my students since it appeared. It very closely parallels the design process that we teach and applies to much more than FSAE cars. And you present it in a much more eloquent and entertaining way than I. To be sure that they read it, I told them that there would be a quiz; and I had to keep my word.

    Be safe.

    Make McDermott
    Retired Texas A&M FSAE Advisor
    1999-2014

  2. #182
    Ops!
    Something Perfect had disappeared :/

  3. #183
    so sad that first post is gone.

  4. #184
    Senior Member
    Join Date
    Jun 2003
    Location
    Melbourne Australia
    Posts
    762
    Discussion of above process
    There is nothing particularly ground-breaking about any of the above. However I personally think it is really important to break down this complex project into its constituent parts, and know how where each sub-problem ties into the project as a whole. Being part of the leadership group in our team years ago, we were faced with all manner of issues to deal with: budget and time management issues, workshop access, setting performance goals, design queries about individual components, packaging conflicts, tooling purchases etc etc etc. We certainly couldn’t solve these problems and make decisions without knowing where to file them and how they all linked into each other in the overall heirarchy.

    I’ve made a few simplifications with the above process. Most notably, you could easily split up Levels 1 and 2 even further, into components integrating into sub-systems then integrating into the full vehicle. That is up to the individual, but probably not too relevant to my following argument.

    I won’t bore you with too much analysis of Level 1 component design, as there are plenty of books out there on vehicle technical design. We should all be reasonably aware of what goes on here, our universities tend to focus on this for our engineering training and most of us should know how to use engineering software and even how to design and build individual components. This level is where most of the hard edged “science” takes place, (although even at this level we need to use some judgment, e.g. weight vs stiffness vs material cost vs manufacturability….). There are probably plenty of people around a uni who can offer you advice about component level design. It is also the level of design where you can spend lots of time and effort refining, for rather small gains overall.

    Level 2 vehicle integration is where things start getting interesting, and this is where the good teams begin to shine. This is how, for instance, how your diff choice or your inner wheel packaging interacts with your suspension geometry, how all the suspension system ties in with the chassis, how power delivery matches up with tyre grip characteristics / chassis geometry, etc. In my year, we learnt some interesting lessons about integration when our choice of 10” wheels, large camber gains and floor mounted shock absorbers (all justified at an overall vehicle level), resulted in next to zero shock movement. We had to make some rather ugly tetrahedral upper a-arms to get around it, but we learnt from it.

    Visually, you can get an idea of integration by how well load paths are fed into the chassis, or how the various controls sit comfortably with the driver. Teams could possibly assess their success at this level in terms of the overall handling of the vehicle, drivability, and overall track speed. Certainly when you see a Cornell or a UWA on track and at their best, you can see the effects of a well integrated vehicle.

    Getting your Level 2 vehicle integration right is a pretty complex task, and is certainly not achievable simply by optimizing all your Level 1 components and then bolting them all together. Personally I found this Level 2 stuff to be the most technically challenging of the tasks that I faced, as it requires wisdom that you just don’t have as an incoming FSAE designer. Experience is the key and assistance and advice from alumni and design judges can be a wealth of information in this respect. (I am loath to say, that your academic support at uni might not be much help at this level. Once again, most academics are hard edged scientists / researchers, and their expertise is usually more about depth than it is about breadth. They are not often too helpful when trying to reason your way through a complex maze of competing priorities).

    Level 3 is where this particular competition gets interesting, and where I would say the greatest gains can be had for the least impact on your time and money. I’d also say that it receives the least attention of the majority of teams, as it seems many have already decided what their overall design “answer” is before they enter the event (usually “we’re going to build the fastest lightest most powerful car and blow everyone to the weeds”). The organizers have developed a clever set of rules that not only reward vehicle speed, but also some “non-racing” parameters such as fuel economy, cost, manufacturability and even knowledge and ability to communicate. It gives teams who may lack the resources to build a full on mini-F1 a chance to compete, but at the same time it makes the competition possibly even more complex than F1 (i.e. vehicle speed and lap times aren’t the sole measure of success). Making some effort to understand the conflicts that are inherent in the rules and the scoring formulae goes a long way to developing an integrated strategy that scores well across the whole competition. I will address this a little further later in my ramblings.

    Level 4 Project Management is just that – it is the set of tasks that ensures that the whole team works together, that deliverables are delivered in a timely manner, that key relationships are maintained with outside stakeholders, and that future teams’ chances of success are enhanced by this particular project. Level 3 competition success is an important factor, but not the only factor to be addressed at this level. Did you complete the project on time and on budget? Is your university happy with your year’s work? Are your team members / workshop staff / sponsors and supporters happy? Did you manage to put a decent effort into all parts of the project (e.g. both dynamic AND static events)? Have you enhanced the prospects of future teams by your effort? These are the sorts of questions that define success at the project management level.

    Measures of success at each level
    When you break a project up into the four steps above, you can then make sense of how to measure your progress at each level. As engineers we should be letting data make decisions for us, so it is important to understand what measures are relevant.

    Level 1: Typical engineering detail level performance parameters – masses, power figures, coefficients of friction, stiffnesses, natural frequencies, damping coefficients, piece costs, etc
    Level 2: Whole vehicle level performance parameters: acceleration capabilities in each direction (forward, lateral and braking), fuel consumption, whole vehicle cost
    Level 3: Competition points scored
    Level 4: Management level measurables – key ones I would suggest being time, money and goodwill. (I have no idea how you measure goodwill, but I’d still call it a measurable as we can get a sense of whether it is increasing or decreasing).

    From the above I’d hope it is apparent there is a bit of a “flow” occurring between levels. The individual pieces with their masses, stiffnesses, power outputs etc, all come together at a higher level to give us a complete vehicle with certain acceleration & fuel consumption characteristics. The whole-vehicle performance characteristics then tie in with our static event skills to enable us to score a certain amount of points in the competition. The number of points scored can then be tied into the dollars and hours spent to determine the overall value of the project (I’d suggest dollars / point and hours / point being the most useful tools at this level).

    It is our job as designers to try to understand this flow, and how the relationships work between different variables and different levels so that we can make wise decisions that give us greatest return for our own given resources. Many of the mistakes we make come from not taking the time to understand some of these relationships, or assuming some of these relationships are obvious or given.

    I’ll come back to this later, but note that many of the parameters that are often used as outright deciding factors by many of us in our projects, such as mass & power, are deeply buried in the detail design of level 1. If your team management is making project level decisions based on Level 1 parameters (e.g. “this year we need to lose 5kg” or “this year we need another 5hp”), then either your management is fluent in the way that these values convert across the various levels to dollars per point and hours per point, or they are misguided.

    The design path
    In a complex project like this, you need to construct yourself a logical pathway that neatly weaves its way through the above levels of integration. You certainly can’t start at level 1 component design and then work your way up. I would say a successful vehicle project plan would look something like this:

    1. Establish Level 4 Project goals and constraints, defining your measures of success for the overall project
    2. Develop Level 3 competition strategy outlining what resources will be attributed to what events
    3. Develop Level 2 vehicle performance goals based on your competition strategy, detailing whole vehicle and sub-system goals
    4. Design Level 1 components to suit sub system and vehicle goals
    5. Manufacture Level 1 components and assemble into working whole
    6. Test vehicle to see how it matches up to Level 2 vehicle performance goals, developing as required
    7. Compete at event, in accordance with Level 3 strategy previously determined
    8. Finalize project, comparing final outcomes with initial measures of success and reporting to key stakeholders accordingly.

    Notice how the process follows a bit of a “V”. We start with top level project goals, work our way down through all the various levels to define our individual component goals. We then work our way back up through to the higher levels, at each level cross referencing where we are, to where we had planned to be. The plan might be a little simplified, and we may very well do a bit of back-and-forth at the middle levels as our project might not work out as wanted, but the basic process is there.
    Geoff Pearson

    RMIT FSAE 02-04
    Monash FSAE 05
    RMIT FSAE 06-07

    Design it. Build it. Break it.

  5. #185
    Senior Member
    Join Date
    Jun 2003
    Location
    Melbourne Australia
    Posts
    762
    Determining a Competition Strategy
    From my observation over the years, I’d say that a large proportion of teams have very little idea of how to deal with the middle levels of the project. Many come in with roughly thrown-together ideas of Level 4 project goals (e.g. “We’re going to blow everyone away”) and then barge straight into Level 1 detail design decisions (our car needs to be 190kg, we need a Honda engine, do we want a turbo, our uprights need to be CNC’ed 7071 aluminium, what diff should we use, we really need a carbon tub, etc etc etc). The level 2 & 3 reasoning are mainly glossed over on the basis of a series of untried assumptions.

    I believe the greatest understanding of what is important in this project can be gained by some reasoned analysis at level 3. We have a very tightly defined set of rules that set out what sort of track we are competing on (70 metre long straights, slaloms of defined spacing, average speeds, etc), and we have a set of point-scoring formulae that tightly define how well we will score for given performance outcomes. Competition results can give us a good idea of what sort of longitudinal and lateral g’s these cars can achieve, and we can usually find some sort of track map with a bit of searching too, so we can’t argue we don’t know what we are in for.

    The competition rules are too complex to make absolute generalizations like “more power is better” or “less weight is better”. In some cases we have conflicts directly related to the performance of the vehicle (e.g. more power can drive down lap times but can also drive up fuel consumption), in some cases the conflicts are less direct (less weight can increase track speed but can tend to decrease vehicle robustness and reliability). FSAE is all about finding balance, and you will not find that balance point if you can only think in absolutes.

    When sorting out a strategy at this level I think it is important to stand above the specific technical details of the vehicle and look at the design on a very basic level. You are looking at the car at a conceptual level, and the goal is to establish whether a car of “x” kW and “y” kg will score better than a car of “a” kW and “b” kg. Is your strategy to try for outright straight line speed, or cornering speed, or fuel economy, or some middle ground with a bit of each? We are basically looking for trends in the rules, and specifics such as gear ratios or suspension settings are not particularly relevant at this level. (For example, when you are considering the choice between a 165kg single and a 200kg 4 cyl, it is not worth worrying about specific gearing ratios or suspension geometries of the two options because either can be optimized when you get further into the detail design). The essence of good decision making is in reducing a complex problem down to a limited number of variables that you can deal with, (and of course picking the variables that are going to give you the most useful info).

    The best few hours work I ever did in this project was to set up a simple lapsim to see how longitudinal and lateral accelerations affect laptimes, (i.e. taking the level 2 vehicle performance outputs, and seeing how they affect level 3 pointscoring). The first lapsim I did was really simple – breaking up an autocross/endurance trackmap into a series of straight lines and circular arcs, assigning appropriate lateral and longitudinal accelerations (assuming constant accel), and then finding laptimes. Change acceleration values, see change in outcome. Although very simple, it was one step up from simple “more power:weight ratio is better” reasoning, and gave some really useful results. For example, according to this simple autocross/endurance lapsim:
    - A 10% increase in lateral acceleration gives approximately 8 times the points return of a 10% increase in forward acceleration.
    - A 10% increase in lateral acceleration gives approximately 14 times the points return of a 10% increase in braking deceleration
    (I have no concern sharing these figures, because people like Pat Clarke or Claude Rouelle aren’t going to believe you unless you can prove it yourself. Or come up with your own lapsims that disprove me. Just do it).

    Although every model is an abstraction of reality in some way, (in particular this lapsim didn’t cover transients, and assumed constant forward accel whereas we are usually diminishing along the straight) I was confident that the figures were at least ballpark. Average speeds were around 55kmh, max speed was 100-110kmh, laptimes were around a second off from actual event times, WOT time was around 17%. So there were enough “ticks” there to indicate that we weren’t way off the ball.

    Note that by analysing how accelerations in each direction are affecting pointscore, we are completely removing the means by which we are achieving these accelerations. Therefore we are clearing our mind of details like whether the vehicle is a 600/4 or 450 single, or carbon tub or spaceframe, or any other design details that may be clouding the argument.

    Once you have a rough acceleration-based lapsim, you can start to extend it incrementally to incorporate lower level data. Do whatever you want, but at this point in time my own lapsim inputs include overall mass, engine power, tyre grip coefficients in each direction and tyre load sensitivity, rear axle load under acceleration, frontal area and drag coefficients, and engine thermal efficiency; and outputs are times and pointscores for each event, % time grip limited and power limited, min and max speeds, fuel used, and maybe a few other things I’ve forgotten.

    (One of the important things is to model fuel economy. Hard to do exactly, but as a start I broke it down into an overall energy load, [including kinetic energy, drag and rolling resistance], and an estimated engine thermal efficiency. Knowing petrol is around 44MJ/kg, and is around 0.7 kg per litre, you can get an idea of litres used. Presently my model predicts around 2.5 litres for the RMIT car, and around 3.2 litres for a UWA style car – which is pretty well representative).

    The importance of going through the above is that you can start to get some idea of how your level 1 detail design decisions affect level 3 competition scores. If you know how a 1kg weight difference or a 1kW power difference affects overall scores, you can start making informed decisions on your overall strategy based on engineering data, rather than “we need to lose 2kg because University X is lighter than us”.

    You can also start reasoning your way through some of the more complex issues related to this event. Rather than simple arguments like “we have to have engine X because it the most powerful”, we can start to be a little more refined:
    “We use engine Y. It has 10kW less than engine X, and this costs us approximately 30 points in straight line acceleration across the dynamic events. However engine Y weighs 10kg less than engine X, and this gains us 15 points in cornering performance. Also, the lighter weight and lower speeds save us 10 points in fuel economy, and the cost saving saves us 5 points in the cost event. Therefore we are at no potential disadvantage to engine Y, and the time saving from this simpler design gives us more time for driver training and testing”.

    (The figures might be a little different, but that last argument is heading in the direction of where we were going at RMIT a few years back).

    Reality Check
    The greatest lesson I learnt by working through the above process is how little effect the potential performance of a design really plays out on final results. For example, my own model indicates that a 1kg weight saving is worth around 1 point in the overall event. If we can see that for instance, a 5kg saving is worth maybe 5-10 points in terms of overall potential - and then we see that the top 5 in a comp may be spread by 200 to 300 points – it puts perspective on all that time you spend saving 1kg out of your chassis or a few hundred grams out of your uprights. And that if your team ended up 250 points behind the winner, or even 50 points behind the winner, it is not going to be a change in your vehicle’s performance specs that is going to bridge the gap.

    On that note I might call it quits for now. There is plenty more to go depending on when I find the time, and whether or not anyone cares to read any of this (full marks for getting this far if you have). Any comments or feedback most appreciated.

    Cheers all,

    Geoff
    Geoff Pearson

    RMIT FSAE 02-04
    Monash FSAE 05
    RMIT FSAE 06-07

    Design it. Build it. Break it.

  6. #186
    Thanks for having that back Geoff, possibly the most valuable single post in the entire forums. Also glad to see you back in here buddy!

  7. #187
    Junior Member
    Join Date
    Jun 2017
    Location
    Melbourne, Australia
    Posts
    1
    Thank you Geoff. I have thoroughly enjoyed reading through your "Thesis" and many excellent additions by others.

  8. #188
    Junior Member
    Join Date
    Nov 2008
    Location
    Thunder Bay, ON, Canada
    Posts
    21
    Does anyone know of a video series or playlist to introduce new students to FSAE?
    Electrical Engineering
    Lakehead University, ON, Canada

  9. #189
    Senior Member
    Join Date
    Mar 2008
    Location
    Buffalo, NY USA
    Posts
    346
    SAE Detroit section has a few videos, start here: https://www.youtube.com/user/SAEDetroit
    I'm sure there are others on YouTube, have fun searching!
    Once you get serious, my choice would be books to study, see topic Sticky: BOOK LIST to reference for car design

    The new edition of Learn & Compete is excellent, order page,
    https://www.sae.org/publications/books/content/b-990/

+ Reply to Thread
Page 19 of 19 FirstFirst ... 9 17 18 19

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts