$17,500
Burlington, NJ

JOHN 856 9o5 19o8

Have pictures, but cannot upload.

My FSAE team had to unload this, and unfortunately I don't have This is a dream come true for small scale production, machine shops, race teams, prototyping, and even the skilled hobbiest. A new machine can run upwards of $100,000.

This machine was used in a university lab to mill small aluminum parts and foam molds for an engineering/racing program. It was used very sparingly over the years. Most machines probably are used more in one year in a commercial application than this unit has been during its entire lifetime.

It was working flawlessly when last used about a year ago before being placed into storage when lab space was lost. It has been updated to accept a USB drive and serviced when last set up in most recent lab space about 3 years ago. Also updated with several adjustable coolant jets. Manual and lots of tooling included.

Power: 3 phase 208V (3 phase converters are available where 3 phase is not)

X Travel (Longitudinal): 22"

Y Travel (Cross): 16"

Z Travel (Vertical): 20"

Table Working Surface: 33"x 14"

Spindle Nose to Table Min: 4.33"

Spindle Nose to Table Max: 24.33"

Table Work Load Capacity: 750 LBS

Spindle Horsepower: 7.5 HP

Spindle Speeds: 30-6000 RPM

Spindle Taper: #40 CAT

Feed Rates, X and Y: 0.1 to 472 IPM

Feed Rate, Z: 0.1 to 472 IPM

Tool Storage Capacity: 22

Approximate Dimensions: 79" x 87"

Approximate Height 106"

Approximate Weight: 6,500 LBS