Hello everyone,
I have some doubts regarding double row bearings. i have found that to use double row bearings you need to provide a nut on the hub to give pre axial load otherwise there will be play in the bearing. So, next year I'm planning to go for single row deep groove ball bearings.
so please correct me if I'm wrong:
1 You don't need pre axial loading in the case single row bearings.
2 if you dont provide pre axial loading in the double row bearing there will be play
3 i can hold the single row bearing in place with press fit and a circlip
idontcare,
Formula Student India.
 |
|
|
Reply With Quote
