Hey Guys,
I've got a hands on tutorial for you today. One of the most misunderstood areas of racecar vehicle dynamics and racecar engineering is how do you measure up a racecar. It's one of these questions that is either over looked or shrouded in mystery. Anyway the following will light the way,
http://www.chassissim.com/blog/chass...up-a-racecar-2
Enjoy
All the Best
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
As we all know dampers are a very necessary but confusing aspect of racecar engineering. In the following I give you some tips and tricks to help navigate your way through the jungle,
http://www.chassissim.com/blog/chass...ing-chassissim
Enjoy
All the Best
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
I realise we are at the tail end of August and September but I thought I'd give you all a quick reminder about the ChassisSim bootcamps in November/December,
http://www.chassissim.com/blog/chass...bootcamps-2017
If you want to learn how to apply racecar simulation so you can get results it's a must attend event and the student rate is discounted.
I look forward to seeing you there.
All the Best
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
A quick community service announcement. Just letting you all know that the ChassisSim Koln/Cologne Bootcamp on Thursday the 13-14th of November 2017 is sold out. For those of you based in Europe who didn't register you'll have to wait till next year.
However we still have slots available for the Charlotte and Indianapolis bootcamps. More info can be found here,
http://www.chassissim.com/blog/chass...bootcamps-2017
All the Best
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
A very quick tutorial for you today,
http://www.chassissim.com/blog/chass...s-ride-heights
It's about using ChassisSim to determine ride heights. I realise that for some of you this is very obvious stuff and my apologies in advance.
However what tends to happen in racing is we get so caught up in what we are doing we can some times forget how useful vehicle dynamics tools can be. Anyway consider it food for thought.
Enjoy
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
Just taking the temperature on this forum and a few questions I've had come my way a big question mark is what should you do with regards to damping. This is an oldie but a goodie,
http://www.chassissim.com/blog/chass...amper-workbook
Enjoy
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
First things first sorry I've been a bit quiet. We've got a lot of exciting things happening with ChassisSim and I've been crazy busy.
Anyway I have a treat for you today. Yesterday I presented a webinar about how to take the lessons learned from using ChassisSim in Formula E and apply it to road cars. You'll find the recording below,
http://www.chassissim.com/blog/chass...-for-road-cars
I had a lot of fun putting it together and I'm sure you'll get a lot out of it.
Enjoy
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
Just letting everyone know I've put out the schedule for the ChassisSim bootcamps at the end of the year. Here is the link,
http://www.chassissim.com/blog/chass...re-on-for-2018
Note these bootcamps do sell out so if your interested I would be getting in sooner rather then later.
All the Best
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
Last month I presented at the inaugural Altair Engineering Australasian FSAE technical conference. Here is an abridged version of what I presented in the afternoon,
http://www.chassissim.com/blog/chass...lation-process
This should give you some really good food for thought.
Enjoy
Danny Nowlan
Director
ChassisSim Technologies
Hey Guys,
Just a reminder about the ChassisSim bootcamps,
http://www.chassissim.com/blog/chass...re-on-for-2018
A quick word about how things are travelling. The German bootcamp is filling up. I still have slots available but it you want to go I wouldn't dilly dally. The bootcamp in Indianapolis on Dec 4-5 has more slots available but I expect them to start filling up as well. All the registration links are in the link above.
Anyway I figured you would all want to know.
All the Best
Danny Nowlan
Director
ChassisSim Technologies