PDA

View Full Version : 2002 F4i BAS bypass missing headlight harness



John Jakob Jingleheimer
07-02-2008, 03:00 PM
Hey I have read everything about the BAS bypass, and nobody talks about how to bypass that sensor if you dont want a headlight loom. Also I have read about the anti theft bypass with the pink wire on the ignition, but Im not sure if I need to do this, and Ive heard tons of different stories. Everyone says consult a schematic, but there were two different versions, mine has 6 wires where the schematic shows 4. I have bypassed the side stand switch and clutch safety switch, so everything is good there. I am trying to run it with no plastics, and no lights, but I heard F4i's dont want to start without lights... can anyone help me please?!?!?

John Jakob Jingleheimer
07-02-2008, 03:00 PM
Hey I have read everything about the BAS bypass, and nobody talks about how to bypass that sensor if you dont want a headlight loom. Also I have read about the anti theft bypass with the pink wire on the ignition, but Im not sure if I need to do this, and Ive heard tons of different stories. Everyone says consult a schematic, but there were two different versions, mine has 6 wires where the schematic shows 4. I have bypassed the side stand switch and clutch safety switch, so everything is good there. I am trying to run it with no plastics, and no lights, but I heard F4i's dont want to start without lights... can anyone help me please?!?!?

Horace
07-02-2008, 03:30 PM
I don't know about the anti theft bypass and the other ones you said, but try running it after you bypass the BAS, because I think we only bypassed the BAS, clutch and side stand.

For the BAS, you spliced the two outside wires on the wiring diagram. I think it was green and red. But if you don't have the headlight loom, the green and the red wire (if I remember the colors correctly) are from two different connectors in the harness and not right next to each other.

If you can link me a picture of your harness I can probably explain it better.