Intake dimensions for R6 engine

[UUJ_Racing]

Hi,

We have the Yamaha 5SL00 Y-3 Engine in our car.
I presume this is an R6 engine?

Is there anywhere I could find the dimensions of the head specifically the port sizes and locations to manufacture a new plenum?

(Long shot I know!!!)

[Grant Mahler]

If you have the engine....measure them.

[UUJ_Racing]

Thanks Grant.......Yopu knob

[Kirby]

Originally posted by UUJ_Racing:
Thanks Grant.......Yopu knob

easy there turbo

calling people names isn't going to win you friends, or net you any help, especially here.

seeing as you have just registered, i suggest you read here. (http://fsae.com/eve/forums/a/tpc/f/125607348/m/72110779141)
so next time you post you don't go making the same mistakes.

Grant's suggestion was a reasonable one. Even if you do manage to find measurements off the internet, it would be unwise to work with them without confirming off your own engine.

That engine is not an R6, atleast not a '03-'05 model. they were J505E's. The easiest way to tell is first by the colour of the clutch cover. Silver: Carbed R6, pre-03. Black: EFI, post-03. If the cluch cover has dimples it is a post-06.

Hope this helps in your research.