Is the Keiser 10" Model (from their website) Correct?

[erau_paul]

I am concerned that the model of the Keiser 10" wheel that you can download on their site is incorrect. It seems apparent when you compare the model to an actual wheel... the wheel center bolt pattern is not located properly. I know the radius of the bolt pattern is correct so I am wondering what is wrong with the wheel center?

Thanks,

Paul

[thewoundedsoldier]

I downloaded the "4x4.dwg" file and it was fine. Wheel center and rim bolt patterns matched up. I cut out the wheel center because we most likely will be designing our own.

One factor may be that teams can request custom bolt patterns when they buy a set of corners. So the drawing might just reflect different orders.

Wade has been super helpful, emailing me back within a day or two each time I've had a question.

[EHog]

we used the keiser 13" drawings to design last year. Everything matched up nicely!