Cranking and spark

[Brokenrider]

Hi

I have very troublesome one that is Ignition problem.

I removed the spark plugs so that Cranking freely. than Trigger is adjusted.

It sparks well.

Than I set the spark plug into head. But It doesnt saprk.

So I remove the spark plug where head.

Therefore It works.

At manual, PS-1000 can't controll ignition coil direlty.

So I wired Power Transistor each cylinder.

IB -> ECU (Falling eadge) E(ground) -> ground CO -> Ignition coil (-)

Than... It sparks with twin cylinder.. ............... - -

Do you think that I must buy Haltech Ignition module???

It is very hard to set Ignitor http://fsae.com/groupee_common/emoticons/icon_frown.gif

[Brokenrider]

Hi

I have very troublesome one that is Ignition problem.

I removed the spark plugs so that Cranking freely. than Trigger is adjusted.

It sparks well.

Than I set the spark plug into head. But It doesnt saprk.

So I remove the spark plug where head.

Therefore It works.

At manual, PS-1000 can't controll ignition coil direlty.

So I wired Power Transistor each cylinder.

IB -> ECU (Falling eadge) E(ground) -> ground CO -> Ignition coil (-)

Than... It sparks with twin cylinder.. ............... - -

Do you think that I must buy Haltech Ignition module???

It is very hard to set Ignitor http://fsae.com/groupee_common/emoticons/icon_frown.gif