PDA

View Full Version : HONDA CBR600 RR 03/04 MODELING DATA


shailen
10-26-2012, 02:51 AM
Hi will simulate the HONDA CBR600 RR 03/04 engine in Ricardo WAVE, VECTIS AND FLUENT as a team. I am from AXLR8R Formula Racing IITDelhi. If someone could please help me with the data them we will be greatful. Also, we can share the results too.

i wanted the valve lift profiles, port entry and exit dia, port profile etc.
shailen
10-26-2012, 02:56 AM
Hi,i will simulate the Honda CBR600RR 03/04 engine in Ricardo,s WAVE, VECTIS AND FLUENT as a team. I am from AXLR8R Formula Racing IITDelhi. if someone could please help me with the data them we will be greatful. Also, we can share the results too.

i wanted the valve lift profiles, port entry and exit dia, port profile etc.
Fantomas
10-26-2012, 03:08 AM
Why don't you just measure these values?

Fantomas
shailen
10-26-2012, 11:07 AM
i dont have the engine right now, we participated in UK and the car it stuck due to some paper problems... can u help ? thanks for the reply
Owen Thomas
10-26-2012, 11:24 AM
You can find much of the information you need at this link (http://aperaceparts.com/tech/05cbr600rr.html). I do not believe there was a substantial difference in operational parameters between '04 and '05.

Another great resource is the Honda service manual for the bike. It has some values you might not get on that website, and is invaluable to have for a variety of reasons.
shailen
10-27-2012, 01:54 AM
ya there is should be considerable difference between 04 and 05 port shape as is mentioned on some sources and also the torque characterstics also changed but i cannot understand why only 03/04 specs cannot be found on internet wheres for all are available even for the f4i ?
check this link:
http://www.superbikeplanet.com/2004/Nov/041123i.htm