PDA

View Full Version : Kodiak Wheels


RickyRacer
10-28-2005, 03:59 PM
Hey everyone,
just need some quick help. Kodiak Wheels is closed for the weekend and I need some dimensions to finish some drawings. All i needed was the radius from the bolt holes (holding the wheel center to the rim) to the wheel center for a 13X7. Thanks in advance.
RickyRacer
10-28-2005, 03:59 PM
Hey everyone,
just need some quick help. Kodiak Wheels is closed for the weekend and I need some dimensions to finish some drawings. All i needed was the radius from the bolt holes (holding the wheel center to the rim) to the wheel center for a 13X7. Thanks in advance.
Marshall Grice
10-28-2005, 05:26 PM
4.25" radius for ours. i'd say the dims are +/-.1". we're not building anything from our wheel model so it isn't terribly accurate.
Denny Trimble
10-29-2005, 05:54 PM
10.375" bolt circle diameter, 18 holes, 1/4" diameter. The shells are 9.750" inner diameter where they sit on the wheel center.

I've built two sets of centers to these dimensions, so far so good.