View Full Version : Wheel flange bolt pattern survey
Scotty
07-06-2007, 03:13 PM
We are looking at re-doing our outer wheel flanges for the 08 year.
Need some help from you guys as to what the most common bolt pattern and stud size is right now.
Scotty
07-06-2007, 03:13 PM
We are looking at re-doing our outer wheel flanges for the 08 year.
Need some help from you guys as to what the most common bolt pattern and stud size is right now.
Jersey Tom
07-06-2007, 08:03 PM
Was kind of an oddball last year.. 3 x 65mm, with I believe .500" dia pins. Will likely be a little bigger pattern this coming year.
We do custom centers anyway. Or at least I hope they do again.
kwancho
07-06-2007, 10:34 PM
4 x 3.75" bolt pattern to fit the wheels, and 12mm studs so we can use ARPs.
rjwoods77
07-07-2007, 11:30 PM
Scotty,
Call Wade at Kiezer wheel. He supplies most of the wheels and would have the best consensus of numbers on what to build flanges to.
Rob
ScottW
07-09-2007, 02:32 PM
4X100mm with 12mm studs
we run 3 x 3/8" on a 64mm pcd
MikeDutsa
07-10-2007, 06:01 AM
4 x 100mm 3/8-24 studs
Powered by vBulletin® Version 4.1.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.