View Full Version : Harness Anchroage Proof Loads
markocosic
05-28-2007, 03:47 AM
As a quick sanity-check, what are folks using as harness anchorage proof-loads?
I'm looking at a 100kg bloke @ 20g deceleration off a single harness attachment with a 1.5x safety factor - reasonable, underkill, overkill? by comparason?
markocosic
05-28-2007, 03:47 AM
As a quick sanity-check, what are folks using as harness anchorage proof-loads?
I'm looking at a 100kg bloke @ 20g deceleration off a single harness attachment with a 1.5x safety factor - reasonable, underkill, overkill? by comparason?
Jersey Tom
05-28-2007, 10:50 AM
We didn't proof load any to be completely honest. But I would say that's reasonable.
Matt N
05-28-2007, 11:53 AM
Marko,
if you made the cockpit a tad smaller, that 100kg dude wouldn't fit in the car...
Brian Evans
05-29-2007, 12:05 PM
FWIW, Willans specifies the attachment points for it's Silverstone harness to be capable of supporting a load of 3,500 lbs per attachment.
Based on that, I'd say your numbers are a bit over-kill.
Brian
markocosic
06-03-2007, 06:24 AM
Thanks Brian - 15kN per harness attachment it is then, including any safety factors. :-)
Powered by vBulletin® Version 4.1.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.