View Full Version : Clutch Cable
I was just wondering if any one could suggest a suitable clutch cable that can be used. We are using a 600cc motorcycle engine. Stock cables are usually too short for a Formula SAE application.
Thanks
I was just wondering if any one could suggest a suitable clutch cable that can be used. We are using a 600cc motorcycle engine. Stock cables are usually too short for a Formula SAE application.
Thanks
tommy
03-09-2004, 03:34 PM
honda goldwing cables are long
We got a push-pull cables from McMaster.com. Quick turnaround for most lengths.
Kirk Feldkamp
03-10-2004, 01:44 PM
http://www.push-pull.com/
This guy is really good. He's got good prices too, and he's a nice guy too. VERY fast turn around time. We do all our cables through him.
Make sure the housing is stiff enough too. We had to get a different housing made up because the first one was a stainless braided one that flexed all over the place!
-Kirk
Foote
03-10-2004, 06:11 PM
All of our cars have used brake cables from tandem bikes. We just go to a local bike shop, and they usually have one in stock. I believe ours was 9' long.
Steve Yao
03-10-2004, 10:59 PM
A well stocked local marine/boat shop should have any push-pull cables you need as well.
Powered by vBulletin® Version 4.1.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.