Brembo P 32G

[mc_zx]

I need the overall tichness of the brembo P 32 G caliper but this information is not on the brembo drawing. If someone could send me this it would be very appreciate. Does someone have any info about the coumpond avalaible at brembo to?

Martin Carrier
Laval university FSAE

[mc_zx]

I need the overall tichness of the brembo P 32 G caliper but this information is not on the brembo drawing. If someone could send me this it would be very appreciate. Does someone have any info about the coumpond avalaible at brembo to?

Martin Carrier
Laval university FSAE

[Marshall Grice]

i get 69mm from the brembo symbol(outside face) to the inside face.

edit: about the pad compounds. i don't know much about the stock pads other then they suck. you'd be much better off switching to something aftermarket, aka ferodo or ebc.

[jim22]

Hi Marshall, I'm a member of Laval Uniersity and I'm looking for more informations about the Brembo P32G. Do you have the spec sheets of the P32G Goldline edition. If you have some dimensions like the total height, width, thickness and the working pressure, it would help me.
Thanks.

[Marshall Grice]

Well the spec sheet doesn't say much, but a pair of caliper(measuring) and pair of calipers(brakes) can come up with some numbers. When i get home from work i'll put some numbers up for you.

[Marshall Grice]

ok so maybe the spec sheet says more then i remembered.

the spec sheet (http://streamvision.csupomona.edu/pics/brembo_P32G.jpg)

overall height is 68mm, the widest point is 102.2mm and it's 70.4mm thick. This isn't the gold line caliper, it's the black one. it's dimensions are a bit larger (not exactly sure how) because it can handle a 5mm thick disk vs. 4mm of the gold line.

[samoo]

bumping an old thread, does anyone have a spec sheet for the gold 5mm disc thickness p32g?

I have an old pdf, but im after the total caliper thickness, and the diameter of the cylinder with the brembo logo on it.