the inevitable F4i cad post

[GTmule]

It's been a year since the last F4i cad request post, so I igured it's about time. (hence, yes, I've searched) If I had hopes of getting a blown up f4i to take apart and measure, I'd do it, but I don't. Perople say the F4i and F4 are "similar".....what the hell does that mean?

The point is, I'd like to see if anyone has any good f4i models or drawings to share? I can do it myself, but ours is a SMALL team, and I don't have itme to do it right, and I'd rather not do it half ass (my engine mounting will have to be pretty precise, the way we're doing the car this year).

Anyway, tell me whatcha got. (boulware <at> gmail <dot> com)

-Chuck Boulware
Technical Director, CAD guru, lead machinist, all around dickhead, UofL 2006 FSAE.

[GTmule]

It's been a year since the last F4i cad request post, so I igured it's about time. (hence, yes, I've searched) If I had hopes of getting a blown up f4i to take apart and measure, I'd do it, but I don't. Perople say the F4i and F4 are "similar".....what the hell does that mean?

The point is, I'd like to see if anyone has any good f4i models or drawings to share? I can do it myself, but ours is a SMALL team, and I don't have itme to do it right, and I'd rather not do it half ass (my engine mounting will have to be pretty precise, the way we're doing the car this year).

Anyway, tell me whatcha got. (boulware &lt;at&gt; gmail &lt;dot&gt; com)

-Chuck Boulware
Technical Director, CAD guru, lead machinist, all around dickhead, UofL 2006 FSAE.

[C Z]

If you look on the 2nd page of this post. There is a link to where this file is now stored.

[Cement Legs]

Hey Zellers, could I get a copy of that. Im not using pro e but I may be able to import it anyway. If you dont mind send me an email cement.legs@unb.ca

[kwancho]

I'd also definetly appreciate a copy, preferably Solidworks, but I'll take a Pro-E.
kwancho at stanford dot edu.
Thanks much!

[boxsterb1]

Does anyone has a solid edge model, if so send it to balzerwb@muohio.edu, Thanks

[CrazyDave]

I would really appreciate the copy of the pro/e model. do000074184@ltu.edu . We have a f4i model that is known to be innacurate. thanks!

[Bubba]

Zellers, please send me a copy of your CMM'ed engine because the model we have used before is garbage.

brent.t.bell@gmail.com

Thanks in advance!!

[Mike Cook]

I'd like to get in on this.
mikecook AT umd.edu

[Eric Benedetti]

Hey C Z!
Please send me a copy of that Pro-e model. It looks like many of us were having problems with the engine model...

[Eric Benedetti]

Sorry, please send it to eric_fsae@yahoo.com

Thanks a lot!!!

[kwancho]

By the way, guys, if you open the Pro-E file with Solidworks, it'll convert it to a Solidworks file. Thanks for sending this out. Looks great!

[Gareth]

I'd be interested in that model if someone could please send me a copy. Does anyone know if this is the same Pro/E model that's been floating around for a few years? I believe it was roughly cad'ed by Enrico Diano from UofT. If it hasn't been updated then the mounting locations are garbage.

Please send it to gareth_kenworthy (at) hotmail.com

Thanks!!

[David Grainger]

Let me add myself to this group...we haven't had an engine in any of our models that wasn't for purely looks. Anywho, a Pro/E document would be awesome. dgraing at clemson.edu

David

[raska]

Common Kawasaki people...

[enk]

Could you send me a copy, please.

enk3@pacbell.net

[Timmay!]

coolva@gmail.com http://fsae.com/groupee_common/emoticons/icon_biggrin.gif

I'd appreciate it! Thanks!

[Korey Morris]

Could I have a copy as well?
kamorr3_a_uky.edu

[James Morrison]

May I pleeeeease have a copy too? jrobertmorrison@yahoo.com Thanks!

[Matt W]

please send a copy to mwasserman@gmail.com

Thanks

[Fred R.]

did anybody get a copy of this?

[RobCMT]

i also would appreciate a copy of this! our dodgy model just cost us 100$ in laser cutting http://fsae.com/groupee_common/emoticons/icon_frown.gif (what is that they say - measure twice cut once?? http://fsae.com/groupee_common/emoticons/icon_wink.gif )

curtinmotorsport@hotmail.com

cheers,

Rob.

[Greg Stevenson]

if it is not to much trouble if you could add me to that list as well. ggsteven AT oakland.edu Thanks

[Daniel Smith]

I would love to get my hands on an accurate pro e model, please email me at: daniel.h.smith@studentmail.newcastle.edu.au

[C Z]

Hey guys,

I'm starting to have a hard time keeping track of who I've sent this to. If you would please e-mail me if you still need a copy instead of posting here. I only check here once every few days.

zellersc@ku.edu

[Chris Razl]

I posted his model for you guys at
http://engsoc.queensu.ca/formulacar/miscfiles/

the proe file is academic version and can't be opened in regular proe (so I can't get into it), but the iges works fine.

Chris Razl
Queen's FSAE

[GTmule]

someone e-mailed me when I started this thread about a model, they were from amaryland. I was hoping they'd contact me as well, just to see how the two models compared.

[T]

could i please have a copy as well?

tdatta@gmail.com

Thanks in advance

[Fred R.]

does anybody have a model of the 2003 RR?
please email me: rayesvf@gmail.com

[nicks94tbirdsc]

I have a CBR600f4i model that we created and used with success.The model was created by someone whos family owns a machine shop and he used their equipment. When fabbing our chassis we just put a spare junk motor where we wanted it and built everything around that so we could be sure it would work. afterward everything with the chassis seemed in check with what the model said it should be. If someone can host it for me (our schools web server only allows .jpgs) I would be happy to share. I didnt make it so I cant say its 100% accurate but it worked well enough for us.

email me at wazzu70 at gmail dot com if you want to compare it to your current model and/or host it.

[HaRD.x.DRiVE]

Err!! Could I have a copy too?

enigmatrix@techie.com

I'd really appreciate it .
THNX A Ton.

[SEVEN]

hey Zellers, could you send me a copy of pro/E mode of F4i

jz130@waikato.ac.nz

thanks!.

[nOOb]

I was wondering if you could send this to me as well?

flowrider@shaw.ca

thanks in advance.