bodywork molds

[Hot Rod JayRad]

Just curious as to what other teams have done with thier old bodywork molds. I guess the 3298029485 hours of sanding really takes its toll...
http://photos-588.ak.facebook.com/ip002/v71/95/44/1228860/n1228860_35011588_796.jpg
http://photos-589.ak.facebook.com/ip002/v71/95/44/1228860/n1228860_35011589_1110.jpg
http://photos-590.ak.facebook.com/ip002/v71/95/44/1228860/n1228860_35011590_1390.jpg http://photos-591.ak.facebook.com/ip002/v71/95/44/1228860/n1228860_35011591_1676.jpg

[Hot Rod JayRad]

Just curious as to what other teams have done with thier old bodywork molds. I guess the 3298029485 hours of sanding really takes its toll...
http://photos-588.ak.facebook.com/ip002/v71/95/44/1228860/n1228860_35011588_796.jpg
http://photos-589.ak.facebook.com/ip002/v71/95/44/1228860/n1228860_35011589_1110.jpg
http://photos-590.ak.facebook.com/ip002/v71/95/44/1228860/n1228860_35011590_1390.jpg http://photos-591.ak.facebook.com/ip002/v71/95/44/1228860/n1228860_35011591_1676.jpg

[PatClarke]

15486372
Firing order of a flathead Ford ;-)
Pat

[Nihal]

Isn't it hazardous to burn Styrofoam?
Was it done with an oxy-acytlene or a propane torch?

1
Firing order of a CRF450 http://fsae.com/groupee_common/emoticons/icon_smile.gif

[Kirk Feldkamp]

Rad. I think the greatest part is the EPA office is right behind the garage.

1243
The firing order of the engine you have right now. Try to remember it this time. http://fsae.com/groupee_common/emoticons/icon_razz.gif

[Didier Beaudoin]

http://img.photobucket.com/albums/v240/Didierf1/CRW_3765.jpg

And before you ask, it wasn't fun.

Good thing is, the mould is ok.

[Didier Beaudoin]

And to emphasize, the "before" shot:

http://www.etudiants.polymtl.ca/fsae/gallery/albums/fabrication_epm_07/CRW_3056.jpg

[B Hise]

I feel your guys pain, we made a one piece body in 05 that took forever, and other composite panels in 04 and 06. So much sanding...

This year, aircraft fabric and sanity.