Looking For Honda CBR600RR cam specs

[Kevin_Farrugia2010]

Hello,

I was hoping someone could help answer a few questions I have regarding the Honda CBR600RR (PC37) [2003-2006] engine. I'm in need of the cam specifications for some Ricardo Wave research and intake design through my research i have not been able to locate the specs.

1. I need to find the lift vs crank angle of the cam, all I have been able to find is it's duration from the service manual.
2. Is there a California spec cam for the CBR600RR motor? if so what is the lift profile of it?

this is all assuming that the f4i and rr motors do not share the same cam or cam profile.

thanks for your help it is greatly appreciated,
Kevin

[Kevin_Farrugia2010]

Hello,

I was hoping someone could help answer a few questions I have regarding the Honda CBR600RR (PC37) [2003-2006] engine. I'm in need of the cam specifications for some Ricardo Wave research and intake design through my research i have not been able to locate the specs.

1. I need to find the lift vs crank angle of the cam, all I have been able to find is it's duration from the service manual.
2. Is there a California spec cam for the CBR600RR motor? if so what is the lift profile of it?

this is all assuming that the f4i and rr motors do not share the same cam or cam profile.

thanks for your help it is greatly appreciated,
Kevin

[Kevin_Farrugia2010]

anyone???

[Lexusteck]

Try Iskendarian Cams (Isky) small engine department. They cut a cam for Kansas a few years back and may still have the specs.

[Kirk Feldkamp]

http://www.aperaceparts.com/tech/05cbr600rr.html

-Kirk

[Kevin_Farrugia2010]

thanks a lot Kirk this info will be very usefull
Cheers