marcoj
03-15-2007, 12:02 PM
I wonder how to solve the bearing for the output shafts of an university special torsen differential
as i do not know in which way the shafts are axially fixed in the differentials housing.
I would interpret the drawing as there are 3 spacer disks inserted inbetween the two worm gears of the shafts
and that the worm gears are simply mounted via splined shafts.
In addition it looks like you could push the splined shafts through the hole assembly without any axial fixation.
Would be a great help to me if anyone has some experience with this differential.
the drawings of the diff: http://www.torsen.com/files/University%20Special%20012000.pdf
thanks for any answers,
Marco
as i do not know in which way the shafts are axially fixed in the differentials housing.
I would interpret the drawing as there are 3 spacer disks inserted inbetween the two worm gears of the shafts
and that the worm gears are simply mounted via splined shafts.
In addition it looks like you could push the splined shafts through the hole assembly without any axial fixation.
Would be a great help to me if anyone has some experience with this differential.
the drawings of the diff: http://www.torsen.com/files/University%20Special%20012000.pdf
thanks for any answers,
Marco