PDA

View Full Version : Land and Sea Dyno Tachometer Hookup Question..


waveslayer
04-05-2011, 11:00 AM
Right now we have the engine tach output from our ECU hooked to the yellow wire on the dyno harness. We aren't recieving any signal. Engine is a cbr 600 f4i. Please help!
waveslayer
04-05-2011, 11:00 AM
Right now we have the engine tach output from our ECU hooked to the yellow wire on the dyno harness. We aren't recieving any signal. Engine is a cbr 600 f4i. Please help!
The Mitch
04-05-2011, 03:59 PM
Do you have the ground wire of the dyno harness connected to the ground of the ECU harness?
The Mitch
04-05-2011, 04:05 PM
Also, you may be able to use the inductive pickup right off of a spark plug wire as seen on page 135 of the Dynomite dynamometer.