Leve
11-16-2011, 08:15 AM
Hi everyone,
We are using ricardo wave to simulate our engine cbr 600rr 2007. But i cannot find which values should i use in friction correlation tab ( ACF,BCF,CCF,QCF). So far, our model has 64Nm at 8000rpm and 85bhp at 10000rpm, by using
ACF=0.35 bar
BCF=0.06
CCF= 133.3 Pa.min/m
QCF=0.016 Pa.min^2/m^2
What values do you have used?
Thanks in Advance
We are using ricardo wave to simulate our engine cbr 600rr 2007. But i cannot find which values should i use in friction correlation tab ( ACF,BCF,CCF,QCF). So far, our model has 64Nm at 8000rpm and 85bhp at 10000rpm, by using
ACF=0.35 bar
BCF=0.06
CCF= 133.3 Pa.min/m
QCF=0.016 Pa.min^2/m^2
What values do you have used?
Thanks in Advance