Megasqurit stimulator

[aguy]

Hello guys
someone can tell me how to run the MegaStimulator , i assembly the PCB and the Stimulator and connected the 9V battry so what next.....
do i need to plug the DB9 cable to a laptop and run it from there by the Megatune software?

[aguy]

Hello guys
someone can tell me how to run the MegaStimulator , i assembly the PCB and the Stimulator and connected the 9V battry so what next.....
do i need to plug the DB9 cable to a laptop and run it from there by the Megatune software?

[Dan G]

http://www.megamanual.com/v22manual/v1stim.htm

[Dan G]

And yes, you solder up the MS and the stimulator, then power up the stim. The LEDs on both the stim and the MS should flicker a bit. But you should definitely connect to a computer to start playing with megatune.

1 suggestion, 9V batts have a tendency to drain down and then stop working pretty suddenly. I use a 12V "wall wart" and it works fine. The supply voltage jumps around a bit, but I never have to worry about dead batteries on the test bench.