Ben Beacock
03-31-2010, 08:08 AM
looking for some aluminum honeycomb paneling for a project I'm working on. Need a piece 48"x48" and 48"x24"
3/4" thickness would be good, but could go 1" or 1/2".
It would be sort of a shear panel bolted in, but mostly for engine noise isolation in a mid-engine car.
3/4" thickness would be good, but could go 1" or 1/2".
It would be sort of a shear panel bolted in, but mostly for engine noise isolation in a mid-engine car.