F4i 3D drawing

[Belo]

Anyone know where I could get a precise 3D drawing of the engine?

I'll have access to a 3d scanner soon but if there's a way to get without having to use de scanner I'd be glad!

We use to do it with a Faro Arm but it takes forever.

Thanks

[kwancho]

I have one in Solidworks that I hear is better than the one that's been floating around for the past few years. What's your email?

[Finmasterflex]

could you send one to finmasterflex@yahoo.com?
thanks

[T]

I would also really appreciate if you could share this. If possible, please send a copy to tdatta@gmail.com

[Joest]

Hi Alex,

If it isn't too much trouble, please CC me when you send out the model. My email is trojanek@orst.edu

Thanks,

Joest

[racheltang]

Solidworks that I hear is better than the one


Alex me too. Y mail is racheltang00@yahoo.com

Thanks,

rachel

[HenningO]

Hi,

I'd be glad to get a copy as well,

henningo (at) gmail.com

[VDubber]

could you cc me in there too???

casm04@gmail.com

-TIA!!

[rookie driver]

Hello Gents,

If someone could forward me a copy as well to derek.guzman@lycos.com I'd appreciate it.

[Smasheart]

Could you send copy to smasheart@hanmail.net
I'd be glad to get one as well...

[kwancho]

smasheart@hanmail.net
Doesn't work. Did everybody else get theirs? I sent most out within an hour of the original post.

[Eric Benedetti]

Please send a copy to eric.fsaeusb@gmail.com

Thanks!

[aflegel]

If it's not a problem I too could really use a copy of the f4i solidworks model. Thanks sooo much.

aflegel@eng.utoledo.edu



~Ashlie

[meatman10523]

if its no big deal could you e-mail me one too please

bfleish@clemson.edu

-Ben Fleishman
Clemson FSAE

[bbcb750]

I'm interested in a copy as well, if you don't mind.

motorpsyko@gmail.com

Thanks,

Long Neck Leader
16oz

[Psychosis]

me too please http://fsae.com/groupee_common/emoticons/icon_smile.gif lau01220@strath.ac.uk

thanks

[Belo]

I've sent you guys the best drawing I've found

Enjoy it !!
Alex

[Draksia]

Does any one happen to have a good drawing of the cbr600rr motor?

[Brandon C]

Could i score a copy of the f4i and or cbr 600 drawing(s) as well. ponchofreak@hotmail.com

[sorokes]

Can we get a copy of the engine? saxonracing@alfred.edu

[hopkins]

Good morning!

I know this is very cheeky, but is there any chance that someone could send me a copy of the cbr solidworks model?

Many thanks in anticipation of your help!

tim

[hopkins]

lol, i guess you'll want somewhere to send it!

pleasejustwork@hotmail.com

thanks again,

tim

[Belo]

Sent to brandon, sorokes and hopkins

[Icke]

Hello from Germany,

please sent a copy to racing@fh-stralsund.de.
We will be very pleased.
Nice greetings and thanks from Stralsund. http://fsae.com/groupee_common/emoticons/icon_smile.gif

Icke
team leader suspension
student-racing team FH Stralsund

[Korey Morris]

how about a copy for kamorr3@uky.edu.

Thanks for the help!

[Dominic819]

if its not to late, i would very much appreciate a copy as well, thx in advance, dominic

email: poopdog819@hotmail.com

[Jesse Black]

Could I possibly get a copy in IGES format? We don't use SolidWorks. I would greatly appreciate it.

Thank You,
blackjes@msu.edu

[lumpypumpkin]

Would it be possible to have a copy sent to lumpkinrd@vcu.edu. I would greatly appriciate it.

[Rycam]

Hello,

Just dropped in this forum and would love to get a copy of the f4i files if possible. ryan@hamiltonconstruction.com

[mwehrmei]

I would also like to get a copy of this, if anyone gets the chance. Thanks in advance.

mwehrmei@u.washington.edu

[aikiboyhqa@gmail.com]

I don't know if the you are still following this thread but can I get a copy as well. My email is aikiboyhqa@gmail.com
Thank a bunch.

[Mark Bacchetti]

I'm interested in getting an f4i copy too. Thanks in advance. mark.bacchetti@gmail.com

[Jersey Tom]

Someone should just host this dumb thing on some webserver space

[dv/dt]

It'd be awesome if I could get a copy of the F4i as well. Thanks in advance. refuse_to_do_nothing@hotmail.com

[mwehrmei]

Hey all,
I recently got a copy of the solidworks model from Alex Kwan (Thanks, Alex), as I wanted to see if the model floating around was any better than our frankenstenian version. The one thing we know we have right is the mounting hole locations, and when I mated the model from Alex on our spaceframe, the locations didn't line up. Be careful if you're using the engine as a stressed member and you're getting your locations off of the model that's floating around. I can send out the model we have for comparison if anyone's interested.

[jsouthee]

Is there any chance of sending a copy to jsouthee@hotmail.com, we're just trying to put together our first car to compete. This would help us out immensely !

Cheers

John

[LSU Dave]

I've gone ahead and hosted ours at http://tigerracing.lsu.edu/cbr600f4i.SLDPRT

I can't take a lot of the credit as that is due to Christopher Zellers, but I did tweak the model a little bit. If anyone does use it and finds anything that's out of whack, please let me know. The mounting points and drive gear should be in the correct locations relative to one another. They've lined up pretty well with what I've measured.

[jsouthee]

I don't seem to be able to access the file on my Solidworks 2004. Is it a later saved version? any chance of e-mailing a version that's compatible? (jsouthee@hotmail.com)

Thanks for the file hosting

John

[Jersey Tom]

Not a bad model Dave... but it needs some fillets!

[Pavan Dendi]

Originally posted by mwehrmei:
Hey all,
I recently got a copy of the solidworks model from Alex Kwan (Thanks, Alex), as I wanted to see if the model floating around was any better than our frankenstenian version. The one thing we know we have right is the mounting hole locations, and when I mated the model from Alex on our spaceframe, the locations didn't line up. Be careful if you're using the engine as a stressed member and you're getting your locations off of the model that's floating around. I can send out the model we have for comparison if anyone's interested.

Mark, I'd like a copy of your model if you wouldn't mind. monQy_at_mail_dot_utexas_dot_edu

Thanks!

[LSU Dave]

Originally posted by jsouthee:
I don't seem to be able to access the file on my Solidworks 2004. Is it a later saved version? any chance of e-mailing a version that's compatible? (jsouthee@hotmail.com)

Thanks for the file hosting

John

Tom: Yeah, I had it all pretty like, but our full assemblies are already getting insane, so I cut down on the number of faces. Sometimes you have to sacrifice beauty for functionality... http://fsae.com/groupee_common/emoticons/icon_wink.gif

John: I'll convert the file to an IGES. It won't be directly editable, but it will open in 2004 and you can always add stuff to it or subtract from it pretty easily.

[LSU Dave]

http://tigerracing.lsu.edu/cbr600f4i.IGS (IGES - what does inventor need?)
http://tigerracing.lsu.edu/cbr600f4i.SLDPRT (2005)

[Mark TMV]

Well, since we started talking about engine CAD models I'm wondering if anybody out there has an accurate model of Suzuki GSX-R 600 motor in SolidWorks format?

Your help is much appreciated

[Ayrton]

The solidworks link is messed up - it's a text file. Thanks for hosting!

[Carbaholic]

so, I've heard some conflicting reports on this post, how accurate is this CAD model?

Carbo

[LSU Dave]

Rehosted here... IGS will open in almost any solid modelling prog, the sldprt is SW2005.

We did our test fitment of the engine a little while back and it's pretty close. I'll know how close in a couple days when the engine mounts are and put in place.
http://tigerracing.lsu.edu/public/cbr600f4i.SLDPRT
http://tigerracing.lsu.edu/public/cbr600f4i.IGS
http://tigerracing.lsu.edu/public/cbr600f4i.jpg

[james17]

Downloading your file right now dave, thanks.

[idunnogui]

It looks like it's been a while since this thread has been added to but can I get a copy of F4i as well.

Thanks,
idunnogui@hotmail.com

[Walker]

If anyone sends it out, could they please also send it to me.

Thanks,
Ryan

ryanwalkerwpi@yahoo.com

[Sathersc]

I would also really appreciate a copy. sathersc@muohio.edu

[Pedrot16]

Hi there!!
I´m from Portugal, we want to attend 2007 Formula Student Competition but we don´t have $$$$ (http://fsae.com/groupee_common/emoticons/icon_smile.gif) to buy a engine right now.

I´ll leave a ftp that everyone can acess:
ftp://ftp.ua.pt/incoming/UART/

just paste or copy as the normal Explorer (select the option "Open FTP Site in Windows Explorer")
we´ll be very thankful http://fsae.com/groupee_common/emoticons/icon_smile.gif

[Pedrot16]

Hi there, i´m from a new team- ENGENIUS -UA Formula Student from Aveiro, Portugal.. We are trying f.student Group3 2007, but we don´t have the cash right now to buy an engine.

I have a god FTP server, if you want.. ftp://ftp.ua.pt/incoming/UART "
To view this FTP site in Windows Explorer, click Page, and then click Open FTP Site in Windows Explorer

It´s a public FTP, just copy and paste as you want http://fsae.com/groupee_common/emoticons/icon_smile.gif

Thanks http://fsae.com/groupee_common/emoticons/icon_smile.gif

[JonChapin]

Can somebody email me a copy of this as well? The model we have isn't that accurate.

email to JonathanChapin@letu.edu

[Albertodsa]

CLOULD YOU SEND ONE TO ALBERTODSA@GMAIL.COM????

THANKS!!!!!!!

[Scannee]

Hi, i know this must be a pain but could anyone please send me a copy of the file?

Thankyou for your time

Steve_canny@hotmail.com
Bell College Scotland

[Joy Pathak]

http://img.photobucket.com/albums/v304/europeansurfer/f4ienginemode-addicted.jpg

There u guys go. http://fsae.com/groupee_common/emoticons/icon_wink.gif
haha sorry.

wangbang609@hotmail.com

[Frankong]

team Swinburne is happy to share our F4i model upon completion - just a few internal dimensions need cleaning up.

http://img245.imageshack.us/img245/2949/cbr600cs9.jpg

We're a bit busy preparing for FSAE-A this year so it might be on the backburner for a month or so.

[Pedrot16]

Thanks you!!!!! Great!!

mical.nite@gmail.com :-)

or upload to ftp://ftp.ua.pt/incoming/UART

THANK YOU!!!! http://fsae.com/groupee_common/emoticons/icon_smile.gif

[Scannee]

Could we get the model just now by any chance? The internals are ok and dont need to be all that accurate, more the outside casings for modeling. cHEERS!

Steve_canny@hotmail.com

[Frankong]

Here is another teaser with some preliminary internal components assembled. Please don't PM me, the full assembly will be shared when it's perfect.
From personal experience, it is frustrating to work with an inaccurate/incomplete model.
Approximately 240 hours has been put into this, so after consultation with my team members, those who can show they've made a serious effort will be the first to receive the complete assembly. Of course there are the animations as well, but they too will have to wait until after the FSAE-A competition.

http://img205.imageshack.us/img205/7121/cbr600block2gs4.png

[Jersey Tom]

That pretty much defines hotness. I think the internals are overkill. But. Dayyuumm.

[reflexdb]

I agree. Frankong - I would be extremely appreciative if we could get a copy of that engine model after the Australia comp. Whatever you need that we have - you got it. Or we could just send you some delicious Colorado beer.

[Joy Pathak]

......... Pfft. We'll send u some Canadian beer mate. Mmmmmmm....mooooolllsoooonnn..keiths.... I wud send u my soul for a copy of that model... but i really like living. http://fsae.com/groupee_common/emoticons/icon_smile.gif

[wrcarter]

Could you please send on a copy to 0535087@student.ul.ie thanks

[D-Train]

Originally posted by Frankong:
...the full assembly will be shared when it's perfect. From personal experience, it is frustrating to work with an inaccurate/incomplete model...
those who can show they've made a serious effort will be the first to receive the complete assembly

No, he can't.

[sanchit]

plz send me a copy of honda f4i solidworkmodel
at sanchit_raw@yahoo.co.in

[TPS]

Seriously are you guys stupid or something if you didnt help us with the model you arent going to get it

[chavez]

Originally posted by Frankong:
team Swinburne is happy to share our F4i model upon completion - just a few internal dimensions need cleaning up.

Is there something I missed?

[fade]

that phrase has a different meaning in Australia http://fsae.com/groupee_common/emoticons/icon_smile.gif

[JuicedH22]

Originally posted by TPS:
Seriously are you guys stupid or something if you didnt help us with the model you arent going to get it

wow, good to know people can make ass's of themselves even from the other side of the planet...


yes, the guy clearly made a mistake by offering the model without consulting the team first, and clearly the choice is not to share (perfectly acceptable), but there is no sense in insulting the people who accept the offer. I mean, i would think someone who isnt "stupid" would just come out and say "sorry guys, we are not sharing the model" I mean... thats the way I would have done it. But then again, im not a prick either...

[Pedrot16]

http://fsae.com/groupee_common/emoticons/icon_rolleyes.gif lol lol, what a shame http://fsae.com/groupee_common/emoticons/icon_smile.gif

[Scannee]

This thread started off with people trying to get a copy of a shared file of an F4 engine, now it has decended into swinburne's model being showboated as a token" oooo look what we can do?" can we not get it back to the origin or is it now open fayre on other teams showing of what they can do without any inclination of sharing?

[muffrx4]

As Swinburme team leader I can assure you all who want the model will get it. The Kong is on holidays after a hellish few weeks and will make this top priority in the new year.

Some do believe at Swinburne that such work should not be given away to all and sundry, with the point being that a great deal of CAD skills can be attained by reverse engineering an engine.

With this in mind I hope you all realise that the intent of a dimensionally accurate and good looking CAD model was to improve skills and provide the chassis team with something workable; and was not undertaken as a showoff piece.

We can send you our animated screensaver if thats what you would like.

So trissy the prissy sissy's point is (translated) those who have made a genuine attempt and simply don't have the time to spend will get the model sooner than others who simply post an email address.

Tim Newton
ts-06

[reflexdb]

Tim, I would say that your previous description sums up our attempts at making an accurate engine model. Currently, our engine model is just the rough shape, very little detail, and less than accurate mounting points. This makes for a tough time designing around the engine, as the largest component mounted inside the chassis. We've tried to use an engine model that we received from Ford, without much luck. We would be very appreciative if we could receive a copy of your model when you decide to send them out. Like I said before, anything you need from us - you got it. Otherwise, I'll ship a couple of cases of delicious, local Lefthand beer out for you guys. Let me know.

Greg

[Pedrot16]

Thanks..

We really need a engine CAD, we are a new team, Portugal is a small country and we really don´t have the money right now do buy (even a used) engine.. we don´t need a cad of the interior of the engine, we only need a cad with all the mountings ok, intake and exhaust supports, transmission shaft ok to enter Class 3 competition..

We will be very thankful to who give us a F4i cad...

Thanks

Engenius Racing Team
Portugal

[Jersey Tom]

Sorry to bring this one back up.. keepin tabs on things.. wondering what address we should ship the beer to in advance..

[kUpUnK]

hello n greetings,

Can somebody send me a copy of the model. i need to do on my final year project..

here is my email address rielshamz@gmail.com

thank you in advance, may god bless u..

[rockingsid]

please mail it to me too....id is-rockingsid@gmail.com.....thanx

[MrSwa]

I'm not sure if this is still open, but can I get the model nick.gilkey@gmail.com
Thanks

[sjain]

Can u plz send a cpy of it at: shelavjain@gmail.com

thanks

[LevyB2]

R
Could someone please send me a copy of the F4i model. My e-mail is LevyB2@rpi.edu. Thanks a lot.

[mark_fsae]

Could someone please send a copy of the F4i model to mark.osmokrovic@gmail.com? Thanks.

[Raghav Mundhra]

please send a copy of this to me too at
raghav1226103@gmail.com
i'll be very grateful to you.

[gul]

please send a copy of this to me too at ankitpolygram@yahoo.com

[RocheInTheWorkplace]

Would anyone mind emailing me a copy of this?

brian.roche@colorado.edu

Thanks!

[PBandJ]

Is the Swinburne now feely sharing this model? I know there was some arguement about it for a while. If there is any way the NC State team could get a copy it would be a great help.

thanks in advance

drew.ulrich@gmail.com

[Biggy72]

Could it just be posted on the WWU server if it is going out? The one currently on there is a decent start, but it's missing quite a few things.

[James Waltman]

If someone will send me a model I'll get it put in the Shared Library.

http://fsae.com/eve/forums/a/tpc/f/125607348/m/99010410831

[Bryce Swartzwelder]

Hello,
I too am looking for ANY Cad drawings related to a cbr 600 f4i engine. Any help here would save much time for me and is greatly appreciated.