pengulns2001
12-16-2005, 12:07 AM
IHI RHB3 and a stock honda f4i block. doing some turbo testing on our dynojet were out of turbo and injector so this is all we got for now
84.4whp
48.5ftlbs
injectors are way overdutied and the turbo wont give me anymore air but i should have some higher results soon, 83.9 hp and 48.2ftlbs is my average of 40 pulls just to make sure it was reliable at those levels
this is uncorrected when i apply the sae correction factor the numbers go up slightly but im not a big believer in the correction factor specifically on turbo cars
84.4whp
48.5ftlbs
injectors are way overdutied and the turbo wont give me anymore air but i should have some higher results soon, 83.9 hp and 48.2ftlbs is my average of 40 pulls just to make sure it was reliable at those levels
this is uncorrected when i apply the sae correction factor the numbers go up slightly but im not a big believer in the correction factor specifically on turbo cars