PDA

View Full Version : Injector Battery Compensation Values


rjwoods77
03-26-2008, 05:38 PM
We are running two 155 peak and hold RC injectors on our car and need to come up with a voltage comp. table for them in megasquirt. RC seems to not know this after asking a couple times. Does anyone have any data on these? We are trying to get a hold of someone in Bosch to help us out since it is a Bosch type 3 injector that RC derives their injector from.
rjwoods77
03-26-2008, 05:38 PM
We are running two 155 peak and hold RC injectors on our car and need to come up with a voltage comp. table for them in megasquirt. RC seems to not know this after asking a couple times. Does anyone have any data on these? We are trying to get a hold of someone in Bosch to help us out since it is a Bosch type 3 injector that RC derives their injector from.
Pete M
03-26-2008, 10:00 PM
We don't use your injectors, so we can't help you directly, but it's not too difficult a thing to measure. Just measure the difference in flow between pulsed operation and pegged open vs what it would be if the dead time were zero. Do this over a range of supply voltage levels and you should have the curve you need.