My loss, your gain, or chance to go pro w/ data system

[John Block]

Here is your chance to hit it big. Due to pending med bills, I must part with my professional CDS data acqusition system. If you got the pro system package deal and added the extras it would cost $18,700. Even if you got the whole thing at once it would likely be $17.7k Some of this stuff is new and has never been used.

Make offer, all offers considered.

Email me at autoware@aol.com with offer.

below is a list of the goodies

Multi Channel beacon w/ carrying case

Bogen 3047 (high end) camera tripod w/ carrying case for beacon

1 beacon sensor

2 meg memory card

Download cable

Commander II 38-s logger w/32 analog channels & 5 RPM channels

1 Trigger switch

1 MSD style engine RPM sensor

3 axis accelerometer (X,Y,Z g sensor)

1 Yaw sensor

1 water temp sensor

1 oil temp sensor

1 oil pressure sensor

1 throttle sensor (string pot)

1 steering sensor (8” travel linear pot)

2 suspension sensors (8” travel linear pots)

2 suspension sensors (10” travel linear pots)

2 wheel speed sensors w/ magnets

4 four channel junction boxes

14 various length sensor extension cables

2 brake pressure sensors

pro system above -------------------------- additional items below

1 spare beacon sensor

1 spare oil pressure sensor

1 spare throttle sensor (string pot)

1 spare 8” travel linear pot

1 spare wheel speed sensor

1 mini dash display

1 spare mini dash display

2 Four channel aero sensors (one air tap on one channel slightly damaged)

1 (24”) Dwyer pitot tu be

1 (8”) Dwyer pitot tu be

mounting hardware for pitot tu be

2 RR ir tire temp sensors w/ individual amplifiers

2 LR ir tire temp sensors w/ individual amplifiers

1 spare rear tire temp sensor w/ amplifier

3 RF ir tire temp sensors w/ 3 channel amplifier

3 LF ir tire temp sensors w/ 3 channel amplifier

4 channel air/fuel analyzer

2 air/fuel sensors

Misc mounting brackets, clamps, grommets, etc.

(note: software not included, but available depending on your needs)

[John Block]

Here is your chance to hit it big. Due to pending med bills, I must part with my professional CDS data acqusition system. If you got the pro system package deal and added the extras it would cost $18,700. Even if you got the whole thing at once it would likely be $17.7k Some of this stuff is new and has never been used.

Make offer, all offers considered.

Email me at autoware@aol.com with offer.

below is a list of the goodies

Multi Channel beacon w/ carrying case

Bogen 3047 (high end) camera tripod w/ carrying case for beacon

1 beacon sensor

2 meg memory card

Download cable

Commander II 38-s logger w/32 analog channels & 5 RPM channels

1 Trigger switch

1 MSD style engine RPM sensor

3 axis accelerometer (X,Y,Z g sensor)

1 Yaw sensor

1 water temp sensor

1 oil temp sensor

1 oil pressure sensor

1 throttle sensor (string pot)

1 steering sensor (8” travel linear pot)

2 suspension sensors (8” travel linear pots)

2 suspension sensors (10” travel linear pots)

2 wheel speed sensors w/ magnets

4 four channel junction boxes

14 various length sensor extension cables

2 brake pressure sensors

pro system above -------------------------- additional items below

1 spare beacon sensor

1 spare oil pressure sensor

1 spare throttle sensor (string pot)

1 spare 8” travel linear pot

1 spare wheel speed sensor

1 mini dash display

1 spare mini dash display

2 Four channel aero sensors (one air tap on one channel slightly damaged)

1 (24”) Dwyer pitot tu be

1 (8”) Dwyer pitot tu be

mounting hardware for pitot tu be

2 RR ir tire temp sensors w/ individual amplifiers

2 LR ir tire temp sensors w/ individual amplifiers

1 spare rear tire temp sensor w/ amplifier

3 RF ir tire temp sensors w/ 3 channel amplifier

3 LF ir tire temp sensors w/ 3 channel amplifier

4 channel air/fuel analyzer

2 air/fuel sensors

Misc mounting brackets, clamps, grommets, etc.

(note: software not included, but available depending on your needs)

[John Block]

Come on guys, I'm in a real pinch, here!

Won't someone offer at least 35 cents on the dollar, thats only $6200 for a top flight professional system. You could instantly be a racing consultant with this thing http://fsae.com/groupee_common/emoticons/icon_wink.gif

[Grant Mahler]

This is the end of the cycle for many of the American teams. VIR, MIS and California will all be done within the next couple weeks. Unless you find some international team (Australia, Japan, Germany are the countries with big FSAE populations) that is early in their design process, I would be you won't find a buyer on these forums.

Also, many teams here get ECU/DAQ systems (like you have described) for free or big discounts. You may get lucky finding some team to pay some money, but 6200? Best of luck...

[Drew Price]

Grant, you need this system.

Then you need to let me borrow it while you're busy thesis hunting.


<3 Drew

[Tim.Wright]

John, check your PM's

Tim