ANOTHER survey!! Drive Shafts.

[__john mac__]

Hi,

Further to deborah's thread regarding a pedal box survey, I would be grateful if anyone could take the time to complete a short survey on the topic of drive shafts.

I am taking part in the same course as deborah, so any input would be of benefit to our project, the survey can be found here:-

<a href="http://www.surveymonkey.com/s.aspx?sm=04_2ft0VQscDFIHBbTUUzueQ_3d_3d">Click Here to take survey</a>

Thanks again.

John

[__john mac__]

That link doesn't seem to work too well, sorry.

I'm not sure how to post a clicky link, maybe this is better:-

http://www.surveymonkey.com/s/LQXYHCR

[coastertrav]

Axe murder your professor/advisor, as these are not useful at all.

[TorqueWrench]

I feel sorry for them. People in our classes had to do them, but they just came to the shop and asked the system leaders. Whoever sent them to this website en mass should be shot...

[coastertrav]

This is why I'm pleased that our program is not affiliated with any classes. Sucks because we don't get credit towards our degree (which would severely help my GPA), but is nice that we don't have to do all this bullshit work.

[TorqueWrench]

Our program isn't even affiliated with the engineering department past they gave us our shop 10 years ago. Only time we have to do surveys like that is when we want to use our FSAE work for our senior design project.

[__john mac__]

Thanks to all who responded to the survey http://fsae.com/groupee_common/emoticons/icon_smile.gif

I have now closed it to prevent wasting any more of your time!

John