View Full Version : Rack and pinion dimensions
Actually this is the first time we will be participating in fsae.
we plan on using a honda cbr 600cc engine.
i was wondering if anybody could tell me what should be the dimensions of the rack and pinion we plan to use for the steering.
it would be a great help.
thank you.
Actually this is the first time we will be participating in fsae.
we plan on using a honda cbr 600cc engine.
i was wondering if anybody could tell me what should be the dimensions of the rack and pinion we plan to use for the steering.
it would be a great help.
thank you.
You need to figure out how much rack travel you need from your steering geometry and then choose a pinion that gives you a suitable gear ratio between the wheels and the steering wheel. To give you some numbers; For our 07 car I used about 25 mm of travel and a 16 teeth module 2 pinion which gave a ratio of about 1:4 (heavy steering, but no need to shift hands when driving).
Powered by vBulletin® Version 4.1.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.