Kettering Admins
04-10-2011, 08:00 PM
The school is making us clean out our old body work molds and we wanted to know if anybody pressed on time for body work is interested in purchasing them for a small sum.
The molds are completed and shouldn't require any work. They have all the required radii for tech. Nothing was damaged in the removal of our pieces two years ago and they have been bagged and in the corner since then.
The nose cone is ~16" wide and 15" deep for 32", and then tapers to the point at 45".
The side pods taper from 24" to 16" over their 39" length, and the pocket is ~13"^3.
We have CAD models available and the means to transport them to you if you pay for our gas and are within a reasonable distance of Flint, MI.
Pics available here:
h t t p : / / s 7 3 1 . p h o t o bucket.com/albums/ww315/phil1734/FSAE%20Body%20Work%20Molds/
Obviously they have been trimmed considerably to fit our car and the sides can be carried out closer to the above dimensions.
Reply/PM/email me with your offer price/shipping suggestions. They'll be scrapped at the end of the month if we don't have any takers.
Andrew
phil 1 7 3 4 @ kettering . edu
The molds are completed and shouldn't require any work. They have all the required radii for tech. Nothing was damaged in the removal of our pieces two years ago and they have been bagged and in the corner since then.
The nose cone is ~16" wide and 15" deep for 32", and then tapers to the point at 45".
The side pods taper from 24" to 16" over their 39" length, and the pocket is ~13"^3.
We have CAD models available and the means to transport them to you if you pay for our gas and are within a reasonable distance of Flint, MI.
Pics available here:
h t t p : / / s 7 3 1 . p h o t o bucket.com/albums/ww315/phil1734/FSAE%20Body%20Work%20Molds/
Obviously they have been trimmed considerably to fit our car and the sides can be carried out closer to the above dimensions.
Reply/PM/email me with your offer price/shipping suggestions. They'll be scrapped at the end of the month if we don't have any takers.
Andrew
phil 1 7 3 4 @ kettering . edu