does anyone have a ps1 drawing in Inventor?

[Homemade WRX]

like the title says...I have tried converting the solidworks drawing but it only loads in inventor as surfaces and can't be used to model.

[Homemade WRX]

like the title says...I have tried converting the solidworks drawing but it only loads in inventor as surfaces and can't be used to model.

[billywight]

Open it in SolidWorks and save as either a stp or igs and import into Inventor. It should work.

[Kenny T Cornett]

save as a step or an sat


sat is a better format for Autodesk products (since that's what AutoCAD uses as it's 3d file format)

[Homemade WRX]

I got the igs file off of the share thread and it opens in inventor like I descibed. It is just surfaces and is unusable. I also don't have solidworks to open and convert to a step or sat file.

[James Waltman]

I uploaded .stp versions of the caliper parts to The Library (http://fsae.com/eve/forums/a/tpc/f/125607348/m/99010410831) .

http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/Br...alipers/Wilwood_PS1/ (http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/Brakes/Calipers/Wilwood_PS1/)

They're a few conversions removed from the original format now so I make no promises.
Let me know if it works for you.

[Homemade WRX]

thanks, I'll let you know what happens