Machine shops in Michigan

[scotty young Taylor Race]

All you veterans....
I need to get two axles out to a team in need...
Is there a local machine shop that can machine the circlip grooves for them,,Or can the mobile GM machine shop do it... need some help here....

[scotty young Taylor Race]

All you veterans....
I need to get two axles out to a team in need...
Is there a local machine shop that can machine the circlip grooves for them,,Or can the mobile GM machine shop do it... need some help here....

[rmk36]

Not sure if the GM rig can cut them, but we have fixed a dremel tool to a lathe at really low RPM and ground the grooves in an emergency situation. Not very elegant, but it got the job done. Any old lathe that spins true can do the job.

[scotty young Taylor Race]

Right on Ryan.... A flat table .grinder and some dude rolling tbe axle will even work.Just tryin to save these guys a couple bucks and make sure they get what tbey need..... but i never heard back from them...

[Sormaz]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by rmk36:
Not sure if the GM rig can cut them, but we have fixed a dremel tool to a lathe at really low RPM and ground the grooves in an emergency situation. Not very elegant, but it got the job done. Any old lathe that spins true can do the job. </div></BLOCKQUOTE>
Emergency? This is standard procedure

bump for a good cause

[scotty young Taylor Race]

Thanks Sormaz..

[Test Driver]

Scotty,

If they're still in need and can come up to Brighton, I can get it done for them. If so, PM.

[flavorPacket]

I'd ask the Michigan team. PM me if you need a contact.

[scotty young Taylor Race]

kracer......
Are you getting any of this bud. The forum is coming through for ya dude.....where are ya.