PDA

View Full Version : Center lock nut for OZ wheels.


lulehf
03-02-2010, 07:09 AM
Im looking for a set of center lock nuts m72 for OZ 13" wheels. The taper is 45 degrees * 10,4mm.

the initial plan was to make them ourselves, but as time is running short we want to buy them instead. Any suggestions on were we might order them from??
lulehf
03-02-2010, 07:09 AM
Im looking for a set of center lock nuts m72 for OZ 13" wheels. The taper is 45 degrees * 10,4mm.

the initial plan was to make them ourselves, but as time is running short we want to buy them instead. Any suggestions on were we might order them from??
RollingCamel
03-06-2010, 06:53 PM
I can't help you on your nuts but may i ask what exact wheel model do you have?

I have searched OZ and i can't find any 13" wheels on their website.
Dsenechal
03-06-2010, 09:30 PM
Im sure a quick call to the OZ distributor will turn up results. I never knew OZ had center locks. All the 13's i have seen are 4 lug.
Ivan Maglica
03-07-2010, 02:59 AM
We at Riteh Racing Team have OZ Superleggera 13" they produce these wheel in versions for 4 lug or center lock.
Pico
03-08-2010, 05:53 AM
Contact OZ Italy directly is the best option in my opinion
JDS
03-11-2010, 05:43 PM
You can easily turn them on the lathe and thread them, and drill a hole in them for a cotter pin. That is what our team did this year.
lulehf
03-12-2010, 12:28 AM
Well, after searching for some time it seems like there is impossible to buy them, so weŽll make them ourselves. An already packed schedule gets even more packed, but who needs sleep right??http://fsae.com/groupee_common/emoticons/icon_smile.gif

Regarding were to find these wheels, Id say give OZ Italy a call, as its much faster than spending hours searching the internet.