F4i Regulator Fitting

[BStoney]

Does anyone know of a source for a fitting that can attach to the outlet side of the stock Honda F4i regulator that will allow for an AN-6 connection? I am thinking a flare to AN fitting like your brake lines, but not sure where to locate one. Any help is appreciated.

[BStoney]

Does anyone know of a source for a fitting that can attach to the outlet side of the stock Honda F4i regulator that will allow for an AN-6 connection? I am thinking a flare to AN fitting like your brake lines, but not sure where to locate one. Any help is appreciated.

[Garlic]

Isn't it just a barbed fitting? Use a rubber hose, cheaper and lighter. http://fsae.com/groupee_common/emoticons/icon_smile.gif

[BStoney]

Yes, it's barbed fitting, just trying to help out our engine guys and clean things up. Hose clamps aren't my favorite either.

[Moody]

Maybe I'm reading the rules wrong, but has anyone gotten any grief for using a hose & clamp for that regulator connection, or does it fall outside of the "high- pressure fuel system" envelope?

- matt

[Marc Jaxa-Rozen]

The return line isn't pressurized, so rubber hose with a clamp is fine.

Marc Jaxa-Rozen
École Polytechnique de Montréal