PDA

View Full Version : Tanner Shocks


Will98Cobra
06-06-2005, 03:36 AM
Does anyone know the extended length of the tanner shocks and the stroke. Also diameter of the mounting holes.

Thanks
Will Austin
ODU Motorsports
Will98Cobra
06-06-2005, 03:36 AM
Does anyone know the extended length of the tanner shocks and the stroke. Also diameter of the mounting holes.

Thanks
Will Austin
ODU Motorsports
BryanP
06-06-2005, 09:46 AM
Extended 10 7/8 "
compressed 7 3/8 "
center to center of mounting eye hole.
Try calling Kelly Tanner (253) 939-1415.
Sorry, I don't have the hole dia. Please let me know when you find out.

Regards
Bryan
adrial
06-06-2005, 02:41 PM
5/16
Juan Andres
08-09-2005, 01:31 PM
To those teams who have used Tanner shocks, have you had any problems with oil leaks?
If so, how bad?.
Juan Andres
09-23-2005, 07:08 PM
One more thing. Is anybody willing to share a ballpark figure for the damping coefficient of the Tanner shocks?. Ours haven't arrived yet..

I'm not asking for accurate stuff. Numbers like 2000 or 3000 or 1500 would be good enough.
kwancho
09-23-2005, 11:46 PM
What's the OD on these suckas? We're designing some clearances, and it'd be useful to know. Thanks!
jack
09-24-2005, 01:21 AM
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Juan Andres:
One more thing. Is anybody willing to share a ballpark figure for the damping coefficient of the Tanner shocks?. Ours haven't arrived yet..

I'm not asking for accurate stuff. Numbers like 2000 or 3000 or 1500 would be good enough. </div></BLOCKQUOTE>

valve them for whatever you want...