PDA

View Full Version : Two Six Channel Amplifiers


.
07-18-2005, 08:43 PM
Custom built, Two six channel amplifiers. Currently configured as half bridge amplifiers to operate with 360 watt strain gauges. Circuit board configuration can can be altered to be full bridge and use other watt strain gauges. Provision for ballast resisters to set zero point. Both amplifiers are mounted in an aluminium box 130mm x 210mm x 60mm. comes with short loom to connect to Motec Data Logger. Amplifiers only used once to strain gauge the rear suspension of a Formula Ford.

Price: $1500 AUS
.
07-18-2005, 08:43 PM
Custom built, Two six channel amplifiers. Currently configured as half bridge amplifiers to operate with 360 watt strain gauges. Circuit board configuration can can be altered to be full bridge and use other watt strain gauges. Provision for ballast resisters to set zero point. Both amplifiers are mounted in an aluminium box 130mm x 210mm x 60mm. comes with short loom to connect to Motec Data Logger. Amplifiers only used once to strain gauge the rear suspension of a Formula Ford.

Price: $1500 AUS