Iñaki
02-12-2004, 03:43 AM
Hi everyone:
We are working with a 2001 F4i unit and for the simulation we need de valve diameters (intake and exhaust) and the camshaft curve that tells you at what angle the valve is opennig, closing and how.
Anyone knows that? It would be wonderfull to tell us that data.
We have obtained a maximum torque in the simulations of 62 N.m at 7000 rpm and a torque curve that falls only 5 Nm till 10000 rpm. Is that good?
Thanks for all.
Iñaki
UPMRACING GROUP
Madrid - Spain
We are working with a 2001 F4i unit and for the simulation we need de valve diameters (intake and exhaust) and the camshaft curve that tells you at what angle the valve is opennig, closing and how.
Anyone knows that? It would be wonderfull to tell us that data.
We have obtained a maximum torque in the simulations of 62 N.m at 7000 rpm and a torque curve that falls only 5 Nm till 10000 rpm. Is that good?
Thanks for all.
Iñaki
UPMRACING GROUP
Madrid - Spain