PE ECU

[93 VR4]

anyone using this out there care to share any good ways to mount a cam sensor instead of a crank sensor? has anyone done this yet?

chris

[93 VR4]

anyone using this out there care to share any good ways to mount a cam sensor instead of a crank sensor? has anyone done this yet?

chris

[Ryan Schoffer]

on what engine - the f4i already has a cam sensor

Vehicle electronics leader

www.ucalgary.ca/fsae (http://www.ucalgary.ca/fsae)

[Matthew]

its fairly simple to weld a bung onto the cam cover of the r6, and then to build-up one of the cam bolts to create a signal

-Matthew Hetler
hetl0020@umn.edu

[93 VR4]

yamaha WR426

[mason]

03 Yamaha R6 has a cam sensor as well...
might be easier to just swap valve covers if you want to use it on an older R6

just a thought

-john mason
chief engineer engine team
Cal State Northridge
www.ecs.csun.edu/sae (http://www.ecs.csun.edu/sae)

[93 VR4]

the 426 is a single cylinder, totally different design, but im guessing you didnt read that