CBR F4 12 tooth front sprocket?

[Dominic Venieri]

Anyone using or know where we could get one of these?

www.formularpi.com (http://www.formularpi.com)

[Dominic Venieri]

Anyone using or know where we could get one of these?

www.formularpi.com (http://www.formularpi.com)

[Cats]

Sorry I can't answer your question. We are having a problem finding a 13 tooth for an F4i.

Eric

[Nam Tran]

AFAM makes a 13 tooth for the F4i. They offer a small discount for FSAE teams.

Nam Tran, Team Leader
University of California Irvine

[Dominic Venieri]

Thanks for the info. We've found a way to get a 12 tooth, but we'll keep that AFAM sprocket in mind.

www.formularpi.com (http://www.formularpi.com)

[This message was edited by Dominic Venieri on January 30, 2003 at 11:10 AM.]

[Cats]

Thanks for the help. We've already bought a different sprocket combo, but if funds permit we will probably go back to the 13 setup that we had in mind.

[Charlie]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Dominic Venieri:
Thanks for the info. We've found a way to get a 12 tooth, but we'll keep that AFAM sprocket in mind.

<HR></BLOCKQUOTE>

Found a vendor or found a way to make your own? We made our own last year but would rather buy.

-Charlie Ping
Auburn University FSAE 1999-present

[Dominic Venieri]

we're making our own (EDM).

www.formularpi.com (http://www.formularpi.com)

[Cats]

We contacted AFAM. They told us that they never ended up making the 13. It turns out there was an issue with the chain and the swingarm trying to occupy the same space with the F4i's.

[Charlie]

We had a 13T in 2001. It came from the UK. I'll see if I can dig it up.

-Charlie Ping
Auburn University FSAE 1999-present

[JDF]

How about a 12 tooth for a Kawi gx64? Best I've found is 13 for that as well.

JDF
Tennessee Tech

[Nam Tran]

I have a 13 tooth AFAM countershaft sprocket in my possession for our F4i. I'm not remembering the pitch but I BELIEVE it was available in 520 and 525.

Would you like me to try to get one for you if they have it? They're about 10 minutes up the street from my school.

Let me know.

Nam Tran, Team Leader
University of California Irvine

[Mechanicaldan]

I believe Sprocket Specialists will make any sprocket you want.

http://www.sprocketspecialists.com/

Cyclone Racing
Iowa State University
Engine Team Leader

[Dominic Venieri]

They will, but you have to buy 6 of them, and its a 3-4 month lead time.

www.formularpi.com (http://www.formularpi.com)

[biggie]

Sounds like just enough time if you are lucky!!

[Dominic Venieri]

Just enough time if you don't want your car running until May! Doesn't do you much good if you want to be on the chassis dyno next month http://fsae.com/groupee_common/emoticons/icon_cool.gif

www.formularpi.com (http://www.formularpi.com)

[JDF]

Sprocket specialists told me they would have to make 8, but only a one month lead time.

Still too much time and money for us.

JDF
Tennessee Tech

[ANDONI]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR> AFAM

Would you like me to try to get one for you if they have it? They're about 10 minutes up the street from my school.

Let me know.
<HR></BLOCKQUOTE>

Hey Nam Tran, is there any chance you can find out if they are still making those (CBR 600 F4i 13 tooth pitch 520 or/and 525)

Thanks a lot....

Andoni Mazeika
www.formulasaeusb.com (http://www.formulasaeusb.com)

[Cats]

Hey, Thanks for the help. We took another look at our setup and I was told the 14 that we got is going to be good enough.

[Nam Tran]

I went up to AFAM today. They have a 520 pitch 13 tooth Countershaft sprocket for the F4 and F4i. I was told by the guy that they never had a 525 picth 13 tooth Countershaft sprocket...which is weird because I count 13 teeth on mine.

At any rate, if I need to buy two sprockets, the price will be $25 each. I'm going to beg and plead for $20 each if I buy three. Shipping to anywhere in the US shouldn't cost more than $4 via priority mail. Send me an e-mail if you are interested. I'll probably pick these up Friday after my midterms.

Nam Tran, Team Leader
University of California Irvine