Aprilia Injector - Mass Flow Rate

[Ale_ET]

Hi,

Does somebody know the Mass Flow Rate of the Aprilia original Injectors???

The reference of the injector is:
7115C
S50
25377126


Thanks all!

Goodbye.

[Erich Ohlde]

the injectors that come stock on the sxv550 are 240 cc/min.

[Macros]

measure them on a flow bench

[Ale_ET]

@ Erich: very very thanks!!! We have Aprilia 550 RXV but I think it uses the same injectors as 550 SXV.
I've seen that your 2008 car has Aprilia 550SXV engine.
What Engine Control Unit do you use?

@ Macros: sorry, we have tried with a flow bench for automotive injectors but Aprilia injectors are too small.

Bye,

[MalcolmG]

since you changed your post, I will change mine so I don't look like an idiot http://fsae.com/groupee_common/emoticons/icon_smile.gif

So this isn't completely meaningless - here's a puppy http://fsae.com/groupee_common/emoticons/icon_smile.gif
http://www.diypuppytraining.com/puppy.jpg

[Ale_ET]

I'm sorry, it was for Erich.

I edit my last post!

[Grant Mahler]

Uhm...wire it up and spray the injector into a test tube or a measuring cup?

[Yellow Ranger]

RXV and SXV use the same injectors

[Erich Ohlde]

we are using a Euro4, by EFI technologies on our 09. the 08 car used an AEM.

[Ale_ET]

http://fsae.com/groupee_common/emoticons/icon_smile.gif Welcome Puppy!!! http://fsae.com/groupee_common/emoticons/icon_wink.gif