Need F4i trigger wheel for TEC

[Dominic Venieri]

Hey guys,

Turns out the shop that rebuilt our motor failed to put on our Electromotive trigger wheel, and put the stock one back on instead. We haven't been able to get a hold of them, but will try again tomorrow.

In the meantime, does any team out there have a 60-2 tooth, 2-1/2" trigger wheel for the Tec3, splined to fit the Honda F4i crank?

If you have a spare you'd be willing to loan us, we'd appreciate it.

Contact can be made either thru the board, email me at venied@rpi.edu, call my cell phone (914) 475-6326, or call our shop at (518) 276-6442.

Hopefully that shop finds ours tomorrow.

Thanks guys.

www.formularpi.com (http://www.formularpi.com)

[Dominic Venieri]

Hey guys,

Turns out the shop that rebuilt our motor failed to put on our Electromotive trigger wheel, and put the stock one back on instead. We haven't been able to get a hold of them, but will try again tomorrow.

In the meantime, does any team out there have a 60-2 tooth, 2-1/2" trigger wheel for the Tec3, splined to fit the Honda F4i crank?

If you have a spare you'd be willing to loan us, we'd appreciate it.

Contact can be made either thru the board, email me at venied@rpi.edu, call my cell phone (914) 475-6326, or call our shop at (518) 276-6442.

Hopefully that shop finds ours tomorrow.

Thanks guys.

www.formularpi.com (http://www.formularpi.com)

[Dominic Venieri]

bump this back up

www.formularpi.com (http://www.formularpi.com)

[Charlie]

We have one, are you needing it before competition? Because it's probably more reliable if we bring it to Pontiac than try to ship it (what if it doesn't arrive Tuesday).

-Charlie Ping
Auburn University FSAE 1999-present

[Dominic Venieri]

Charlie you are a life saver let me tell you! That would be awesome if you guys could bring it out to competition - we REALLY appreciate it.

In the meantime, we are going over to the motorcycle shop who did the work for us tomorrow and figuring out what the heck happened.

We're also going to have a new one overnighted from Electromotive tomorrow, with the hope that we can get the spline EDM'd on Tuesday, or at GM powertrain on Wednesday.

Thanks very much Charlie. When does your team plan on arriving in MI so's we can find you? If you'd like, email me with a contact # at venied@rpi.edu.

Dominic

www.formularpi.com (http://www.formularpi.com)

[Charlie]

Dominic, or someone from RPI-

Please contact me IMMEDIATELY involving this matter. I have tried email and am getting no response. We have plans for our 2002 car, which is idle without this trigger wheel. Thanks!

Charlie

-Charlie Ping
Auburn University FSAE (http://eng.auburn.edu/organizations/SAE/AUFSAE)
5th Overall Detroit 2003
? Overall Aussie 2003. http://fsae.com/groupee_common/emoticons/icon_smile.gif

[Charlie]

Anyone? http://fsae.com/groupee_common/emoticons/icon_frown.gif

-Charlie Ping
Auburn University FSAE (http://eng.auburn.edu/organizations/SAE/AUFSAE)
5th Overall Detroit 2003
? Overall Aussie 2003. http://fsae.com/groupee_common/emoticons/icon_smile.gif

[Dan Gurick]

It's on the way

Dan Gurick
Rensselaer Formula SAE