Tilton Master Cylinders

[jerktaculus]

Hey all,

We've been pretty strong proponents of Wilwood MC's over the years - but has anyone run the TILTON 75 series (short) MC's - and have any specific information on them? - i.e.
- weight
- any bleeding/flex or other operational problems?

Thanks.
Jeremy Koudelka
University of Toronto FSAE

[Brent Howard]

We are planning on using these this year.

Brent

www.ucalgary.ca/fsae (http://www.ucalgary.ca/fsae)

[innominate]

Is there any reason in particular that you are choosing Tilton over, say, an AP model of the same type (remote resevoirs, etc.)?

[jack]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR> Is there any reason in particular that you are choosing Tilton over, say, an AP model of the same type (remote resevoirs, etc.)? <HR></BLOCKQUOTE>

..if you get them for free...

[RaID]

weve used the 75Series last year without any issues

and we will be using them this year aswell
really cant say anything bad about them

well made, easy to dissasamble, change pushrods, what ever,
we chose to run them this year because we can get them at cost price and their physical dimensions suit our pedalbox package

[95M3Racer]

Did you guys use the CP2623 Extra Short mst cyl from tilton?

[RaID]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by 95M3Racer:
Did you guys use the CP2623 Extra Short mst cyl from tilton? <HR></BLOCKQUOTE>


dont know which one you mean
all the part numbers that i have of their master cylinders (and brake components for that matter)
start with a number
eg 75-625S

[95M3Racer]

Oh ok, what part number did you use?

[RaID]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by 95M3Racer:
Oh ok, what part number did you use? <HR></BLOCKQUOTE>

we used
75-625S
and
75-812S

both 75 series MCs with the small reservoir kit
just different bore sizes

d/l the tilton catalogue from their website
all the info is in there