View Full Version : Fuel Injector and Fuel Pump specs for Honda F4i
EuroUri
11-09-2003, 11:15 PM
i'm having trouble finding this info. If anyone knows the flow specs for the injectors and the pump, please post. thanks.
-Uriah
Virginia Tech FSAE
Engine Team: Fuel System
Zylinderkopf VW/Audi Car Club
Brent Howard
11-10-2003, 07:10 AM
I know the pressure at the injectors is 50 PSI
Brent
www.ucalgary.ca/fsae (http://www.ucalgary.ca/fsae)
bigtoyota9
11-10-2003, 07:27 AM
Hey there is a post on injectors a couple months back, and i remeber someone talking about F4i injectors. I remeber seeing that the flow rate of the stock injectors is 210cc/min. And Brent is correct the fuel pump operates a 50psi . We run the stock injectors on sequential fire with great success and intend to go the same this year.
Heres a link to that thread about coils and injectors: http://fsae.com/eve/forums?a=tpc&s=763607348&f=125607348&m=9466032644
Ryan Schoffer
11-11-2003, 01:23 PM
12V
62PSI max
~1L/min flow rate at 50 PSI
Vehicle electronics leader
www.ucalgary.ca/fsae (http://www.ucalgary.ca/fsae)
[This message was edited by Ryan Schoffer on November 11, 2003 at 08:05 PM.]
Powered by vBulletin® Version 4.1.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.