Fuel Pump for Honda CBR600F4i

[Chad]

Does anyone know of a good fuel pump that works well with the Honda CBR600F4i? We are considering installing a factory fuel pump, but we are also looking for other options. If anyone has any ideas or suggestions, it would be great if you'd let me know.

Thanks,
Chad

[Chad]

Does anyone know of a good fuel pump that works well with the Honda CBR600F4i? We are considering installing a factory fuel pump, but we are also looking for other options. If anyone has any ideas or suggestions, it would be great if you'd let me know.

Thanks,
Chad

[B Lewis @ PE Engine Management]

Hi Chad,

We have had good luck with the fuel pump from a 86-88 Ford Ranger for the 2.3L 4-cyl. It is an external pump that is reasonably sized. I have a "Master" part number of E2000. Master is a replacement part brand and is carried at some parts houses. Also a NAPA number of NFPP74028 (I think). The pumps run about $100.

Brian Lewis
Performance Electronics, Ltd.
www.pe-ltd.com (http://www.pe-ltd.com)
"Complete Engine Management Systems for $798"

[Ben Beacock]

Brian,

What kind of fittings does it have?

Ben Beacock
Co-Manager
2004 Gryphon Racing - University of Guelph (http://www.soe.uoguelph.ca/uogracing)

[B Lewis @ PE Engine Management]

Hey Guys,

Here is a picture of the fuel pump in question. One side is AN and the other is pipe (I think). I don't have any here that I can check, but I was able to find the picture.

http://www.pe-ltd.com/temp/fuel%20pump.jpg

Brian Lewis
Performance Electronics, Ltd.
www.pe-ltd.com (http://www.pe-ltd.com)
"Complete Engine Management Systems for $798"