PDA

View Full Version : zx6r engine model


ReadySetGo
10-02-2003, 05:08 PM
Just wondering if anyone wanted to shoot us a link or direct file of a zx6r motor we'd greatly appreciate it. Anything type of file will work, .prt is prefered.

Thanks
Omar

-Omar Barker
Vice President
CSU, Sacramento
Hornet Racing Development
ReadySetGo
10-02-2003, 05:08 PM
Just wondering if anyone wanted to shoot us a link or direct file of a zx6r motor we'd greatly appreciate it. Anything type of file will work, .prt is prefered.

Thanks
Omar

-Omar Barker
Vice President
CSU, Sacramento
Hornet Racing Development
ReadySetGo
10-06-2003, 01:20 PM
darn 48 views and no one wants to share http://fsae.com/groupee_common/emoticons/icon_frown.gif

-Omar Barker
Vice President
CSU, Sacramento
Hornet Racing Development
Mechanicaldan
10-07-2003, 08:48 PM
Omar,

Do you want to purchase a 12 or 13 tooth front sprocket for a ZX-6R?

drop me an email happydan @ iastate . edu

Cyclone Racing
www.cyclone-racing.com/fhome.htm (http://www.cyclone-racing.com/fhome.htm)
Iowa State University
Project Director
ReadySetGo
10-08-2003, 04:45 PM
haha, we are using the stock one. If we want to go with the lower, we'll let you know!

Thanks for the heads up though.

-Omar Barker
Vice President
CSU, Sacramento
Hornet Racing Development
Mechanicaldan
10-08-2003, 11:35 PM
Stock front is 15. How big is your rear? 60 teeth? Max spped at competition is ~65 MPH? So you use 2 gears?

Cyclone Racing
www.cyclone-racing.com/fhome.htm (http://www.cyclone-racing.com/fhome.htm)
Iowa State University
Project Director