PDA

View Full Version : Solidworks Simulation-Torsional Rigidity Analysis


BMH
02-13-2010, 02:07 PM
Hello, I was wondering if anyone could help me out on how to do a torsional rigidity test in solidworks simulation, or if you can point me in the direction of where there may be some tutorials on the subject, that would be good as well. Thanks!
BMH
02-13-2010, 02:07 PM
Hello, I was wondering if anyone could help me out on how to do a torsional rigidity test in solidworks simulation, or if you can point me in the direction of where there may be some tutorials on the subject, that would be good as well. Thanks!
d.madnick
02-13-2010, 02:10 PM
http://www.youtube.com/watch?v=jKnfo6I6zJU
Mikey Antonakakis
02-13-2010, 06:49 PM
There are a ton of threads on here, as well as a lot of discussion/debate. You'll find a TON of stuff if you do some searching, and it's worth the read. Actually if it's just SolidWorks specific, I'm not so sure how useful the search function will be, but I know there is plenty of debate on the "proper" way to constrain a model.