raptor93
01-29-2017, 09:08 AM
i am an FSAE team from dubai. a confusion regarding a technical issue for the design of the chassis. We are following the following design for the front bulkhead support structure.
http://imgur.com/SoEHYcl
Just to make sure, our design has slightly slanted structural members as highlighted in yellow. Kindly confirm if its all okay.
http://imgur.com/J1k31nm
http://imgur.com/SoEHYcl
Just to make sure, our design has slightly slanted structural members as highlighted in yellow. Kindly confirm if its all okay.
http://imgur.com/J1k31nm