wolf14
04-13-2016, 10:56 AM
Hello Everyone,
We had a small problem here. We wanted to purchase WILWOOD DYNAPRO SINGLE PISTON calliper of piston diameter 1.38" with center distance between the mounts of 3.25"(MODEL NO.: 120-9688-LP). The 3D CAD model of the caliper is not available anywhere. If anyone of you has the CAD model of the same, please share it with us. We wanted it very urgently for our hub design.
The drawings available on the website are not sufficient for manufacturing design. Also models available on GrabCAD are not specific as well.
Here is our email id: teamoctaneracing2015@gmail.com
Waiting for your reply.
Sanath Salunkhe
Team Octane Racing
College of Engineering, Pune
We had a small problem here. We wanted to purchase WILWOOD DYNAPRO SINGLE PISTON calliper of piston diameter 1.38" with center distance between the mounts of 3.25"(MODEL NO.: 120-9688-LP). The 3D CAD model of the caliper is not available anywhere. If anyone of you has the CAD model of the same, please share it with us. We wanted it very urgently for our hub design.
The drawings available on the website are not sufficient for manufacturing design. Also models available on GrabCAD are not specific as well.
Here is our email id: teamoctaneracing2015@gmail.com
Waiting for your reply.
Sanath Salunkhe
Team Octane Racing
College of Engineering, Pune