"Yamaha YZF-R6 2009" Base map

[beshr]

hello everybody
can you help me please
i have link G4+ and the engine is "Yamaha YZF-R6 2009" i want base map for it, because i searched for it and i didn't found any thing
can you tell my where i can fiend the base map ?
thank you all

[Kevin Hayward]

beshr,

You will most likely need to make one yourself. A decent understanding and maybe some basic simulation (i.e, dynomation) will probably get you close enough to start and get running. If you have been running other 600cc engines you could probably start it off something similar (adjusting timing etc to suit location of triggers).

Just remember to go really slow when you start tuning. Work up slowly through the rev range, focusing on low throttle low rpm regions and working up. These engines are pretty resistant to being damaged in these running conditions, meaning bad ignition and fuel settings are likely to make it run poorly or not at all rather than causing catastrophic failures.

Kev