Adam Farabaugh
09-14-2015, 06:24 PM
1x EMRAX 228 HV - $2500
- purchased 2014, in use <40 hrs
- combined-cooling (liquid and rotor shell vent holes)
- has elbow barbed coolant fittings, accepts M12 coarse thread fittings
- we bought the motor with an encoder, removed the stock encoder, and then fitted a custom digital encoder board which calculates and outputs the resolver signal the controller requires. We'd ship with this if you like, was rock-solid for us.
1x UNITEK BAMOCAR-D3-400-250 RS - $2500
- similarly in use <40 hrs total, purchased 2014
Buyer pays for shipping
More willing to negotiate if you want to take both in 1 purchase
Feel free to email for more details, adamfara@seas.upenn.edu, although I check this forum pretty often
This will come out of our 2014 FSAE Electric car
We can likely throw in some nice shielded HV cable leads to sweeten the deal
This is better than half price from brand new.
- purchased 2014, in use <40 hrs
- combined-cooling (liquid and rotor shell vent holes)
- has elbow barbed coolant fittings, accepts M12 coarse thread fittings
- we bought the motor with an encoder, removed the stock encoder, and then fitted a custom digital encoder board which calculates and outputs the resolver signal the controller requires. We'd ship with this if you like, was rock-solid for us.
1x UNITEK BAMOCAR-D3-400-250 RS - $2500
- similarly in use <40 hrs total, purchased 2014
Buyer pays for shipping
More willing to negotiate if you want to take both in 1 purchase
Feel free to email for more details, adamfara@seas.upenn.edu, although I check this forum pretty often
This will come out of our 2014 FSAE Electric car
We can likely throw in some nice shielded HV cable leads to sweeten the deal
This is better than half price from brand new.