mortalkombat
12-13-2014, 04:58 AM
Hey Guys,
Our Team from northern Germany is constructing an E-Racer for the 4th time this year.
In this season we want to change things a little. We are switching from 1 cooling circuit to 2 circuits one for the inverter the other for the engine. The rules for Catch cans say, that you need a catch can that is able to gather either 0.9 liters or 10% of the water flowing in the cooling system. We would like to employ one catch can for these two circuits, because both together contain less than 10 liters. Question is: is there a rule that dictates you to use one Catch can per each circuit or are we free to do one for 2?
Our Team from northern Germany is constructing an E-Racer for the 4th time this year.
In this season we want to change things a little. We are switching from 1 cooling circuit to 2 circuits one for the inverter the other for the engine. The rules for Catch cans say, that you need a catch can that is able to gather either 0.9 liters or 10% of the water flowing in the cooling system. We would like to employ one catch can for these two circuits, because both together contain less than 10 liters. Question is: is there a rule that dictates you to use one Catch can per each circuit or are we free to do one for 2?